2.0 16v wiring advice needed!!

[fleming]

U alright people, just gotta wire my 2.0 16v into my 1.4 sr now. Have got the fuel pump rigged up already off of a switched feed through a relay so dont have to worry bout that now. Can you tell me what the wires on the engine loom listed below need to be connected to?

1. Black / Red
2. Blue / white
3. Blue
4. Blue / yellow
5. Black
6. Green
7. Blue / Brown
8. Brown / Yellow
9. Red / Blue
10. Blue / Red

What should i connect and what should i leave, as isnt there only about four you have to link up? The starter and alternator shall i wire as the original 1.4 sr rather that link through engine loom?

N e advice on this wiring is much appreciated.

[Austin_Nova16]

Use the existing loom for the starter, alternator etc, and the temp sensors.


have a look on www.pngregion4.co.uk for the rest

[fleming]

Ideal, cheers mate. My fuel pump is already sorted so then all i got have to worry about is:

1. The black to a 12v switched
2. The red to a 12v constant
3. The green to the pulse output on ignition coil

Correct? Do you have to earth the ECU case aswell, from past experiences??

[brian]

the ecu doesn't need to be earthed. mine was on the drivers side shelf inside as below. you are right with that wiring.
http://www.novaload.net/forums/album_see.php?id=540

[Austin_Nova16]

the ecu doesn't need to be earthed.

the ecu is earthed via the ring connectors that come off the loom nr the injectors......at least..mine was..

[brian]

the ecu is earthed via the ring connectors that come off the loom nr the injectors......at least..mine was
i just presumed he wanted to know if the box itself need to be earthed :?

[fleming]

Yeah was just askin aif the case itself needed earthing, thanks anyway chaps.