View Full Version : how do i remove a mk2 spoiler
paddy quinn
23-04-11, 01:04 PM
as title i need to remove it as i need rear window out for tinting
steviegsi
23-04-11, 01:08 PM
Open the boot, undo the 4/6 nuts, give the spoiler a wobble and pull.
4 nuts on the inside and careful prising, stanley knife down the back of it to cut through the sealer/bonding gloop
paddy quinn
23-04-11, 01:47 PM
i can only see two nuts on mine
well undo them nuts and pull it
4 nuts on the inside and careful prising, stanley knife down the back of it to cut through the sealer/bonding gloop
Plus lots of shouting/screaming/swearing as theyre an absolute pain in the proverbial to remove:cry:
brainsnova
23-04-11, 09:09 PM
Hair dryer to soften the double sided tape stuff and push up and pull it.
LEWI007
23-04-11, 09:37 PM
I think i used a piece of wire last time i did this and pulled it backward and forward through either side to cut through the glue.
^dont, they bent really easily.. As there is metal in the middle.
blue_peg_16v
23-04-11, 11:15 PM
Undo the 4 bOlts as said then get the guns out and pull like feck
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.