how do i remove a mk2 spoiler

[paddy quinn]

as title i need to remove it as i need rear window out for tinting

[steviegsi]

Open the boot, undo the 4/6 nuts, give the spoiler a wobble and pull.

[Iain]

4 nuts on the inside and careful prising, stanley knife down the back of it to cut through the sealer/bonding gloop

[paddy quinn]

i can only see two nuts on mine

[AdamK]

well undo them nuts and pull it

[Spudly]

4 nuts on the inside and careful prising, stanley knife down the back of it to cut through the sealer/bonding gloop



Plus lots of shouting/screaming/swearing as theyre an absolute pain in the proverbial to remove:cry:

[brainsnova]

Hair dryer to soften the double sided tape stuff and push up and pull it.

[LEWI007]

I think i used a piece of wire last time i did this and pulled it backward and forward through either side to cut through the glue.

[Balley]

I just yanked mine! lol

[Benn]

^dont, they bent really easily.. As there is metal in the middle.

[blue_peg_16v]

Undo the 4 bOlts as said then get the guns out and pull like feck