View Full Version : C16XE with a powerbox
boyd_1989
21-04-11, 10:46 PM
Hi all, just wondering what gains in bhp i will see in a powerbox on my c16xe?
does any 1 know
thanks :thumb:
NOVA saloon
21-04-11, 10:57 PM
Unsure on bhp 10-20 mAybe but 5000rpm 7200 is somthing else cheapest and best mod to do IMO.
boyd_1989
21-04-11, 11:06 PM
Unsure on bhp 10-20 mAybe but 5000rpm 7200 is somthing else cheapest and best mod to do IMO.
thanks, u say 7200 does that mean the powerbox raises the limit? because mine limits at about 6300
NOVA saloon
22-04-11, 01:54 AM
Well mine has a power box ported and polished head fuel pressure reg sbd 4-2-1 and yes seems too but never opend up ecu too see if it has a chip. That's protects job wen I can be bothered too take it for a rolling road set up lol.
To get the best out of it you need to have re-map or even better you need to go standalone management and ditch the factory tat.
can you remap a standard ecu?
They change the top eprom chip in the ECU but its still going to use stock sensors and that horrid air flow sensor. I personaly don't rate standard ecu remapping look at the likes of superchips :roll:.
If you must remap, at least swap to the X16XE ecu and loom so you can run a map sensor instead of the AFM.
how much would a remap or a good ecu chip cost?
Before I decided to go DTA, Motorsport Developments in blackpool quoted me £350 with a raised rev limit of 7300.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.