V6 vectra brakes.

[cossienova]

Will v6 vectra callipers fit on a nova? if so whats involved and what discs do i need to buy?

[Jack]

http://i13.photobucket.com/albums/a266/razorjack/Cars/Project%20Ghey/24072008563.jpg

:)

I use Fiat Coupé discs, they're 284mm but need the bolt holes drilling out by 1mm as the PCD is 98mm. You can also use 280mm Meriva (CDTi iirc?) discs.

[edit] Minimum 15" wheels of course.

[cossienova]

Cool thanks.do the callipers bolt straight on the hubs then?

[Jack]

Mine did, yeap.

[clubberlang23]

They bolt straight on but you'll need to redrill the discs from 5 stud to 4 stud and a spigot ring (i have some spigot rings for sale)
http://i327.photobucket.com/albums/k475/clubberlang23/P8280162.jpg

[cossienova]

is there no discs 4 stud you can buy then? I dont mind re drilling if i have too.How much you after for the spigot rings? is the standard master cylinder ok with the bigger callipers?

[NOVA saloon]

Pedal is abit spongy but yes there ok and mine are on a 1.2 servo and there bob on.

[clubberlang23]

is there no discs 4 stud you can buy then? I dont mind re drilling if i have too.How much you after for the spigot rings? is the standard master cylinder ok with the bigger callipers?

Can buy meriva 280mm discs, rings are £12.50 posted mate. Mine was fine on the standard master cylinder.

[Mike]

With Meriva disc's youll only need a 1.5mm thick spiggot, if that!

[LEWI007]

Look in the articles section on the brakes, i fitted Vectra V6 Brakes onto my nova, calipers and discs were a straight fit, but i used Meriva 4 stud discs, i wrote in there the exact kind to use so have a read of that.