View Full Version : V6 supercharged ??
Brasso93
12-04-11, 09:02 PM
Has anyone on here ever supercharged a v6 engine??
If so have you got pics and info as i fancy a bench project until i get another car to run while it goes in the nova
General Baxter
12-04-11, 09:06 PM
ha, i was wondering about this today, sitting at work
fitting the 3L v6 into my omega, using the 2.5 vectra inlets, and sitting a charger between them
Brasso93
12-04-11, 09:10 PM
its been on my mind for weeks now just cant get my head round how to do it lol
General Baxter
12-04-11, 09:11 PM
some prit stick and rubber bands is a good place to start :D
Brasso93
12-04-11, 09:18 PM
i was thinking a4 paper and drawing a v6 on it and make the sounds myself lol ;)
General Baxter
12-04-11, 09:25 PM
be more reliable then what i could come up with lol
just been looking.
http://i29.photobucket.com/albums/c296/aarondagley86/23032008066.jpg
and it wouldnt be to hard!
something like this
http://www.actproducts.co.uk/shop/images/alloy%20inlet%20small.JPG
some alloy tubes, a TIG welder, and your away.
Brasso93
12-04-11, 09:36 PM
just been looking.
http://i29.photobucket.com/albums/c296/aarondagley86/23032008066.jpg
and it wouldnt be to hard!
something like this
http://www.actproducts.co.uk/shop/images/alloy%20inlet%20small.JPG
some alloy tubes, a TIG welder, and your away.
REP:thumb:
General Baxter
12-04-11, 10:19 PM
you do know that conversion is over £3k iirc lol
where as im thinking of getting a eaton of a 4L jag lol
Off the shelf kits have been available for the omega for ages.
Would be a squeeze in a Nova though unless you plonked it direct on the lower inlet. Anad dremelled a massive hole in the bonnet lol
run a drive shaft to the 'rear' of the engine, over the gbox & fit it there.
sulphur
12-04-11, 10:28 PM
That 'charged v6 is off VVOC. In the region of 310bhp if I remember. Spend a small fortune on it though.
General Baxter
12-04-11, 10:32 PM
any idea on what psi they can run on std comp and managment
paddy quinn
13-04-11, 02:58 AM
any idea on what psi they can run on std comp and managmentroughly between 5 and 10 psi
run a drive shaft to the 'rear' of the engine, over the gbox & fit it there.
Good thinking batman, like b18 chargers? I don't know why it would be over the glovebox though :p
no, over the gearbox you twonk. i bet that plenum would turn round pretty easily too
That inlet in the piccies will give uneven flow to the 2 cylinders near the gearbox compared to the other 4.
i thought a decent size plenum sort of codges the effect a bit
grey area, but you are forcing air down the system, so coming out of the pipe leading to a 3 way manifold, you might just 'miss' the first outlet...
General Baxter
13-04-11, 10:53 AM
well let all 6 cylinders have there own chargers,
win :)
well not really, think of the pulley drag lol
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.