View Full Version : Is there meant to be a vac pipe here
http://i54.tinypic.com/35jz4gp.jpg
http://i51.tinypic.com/2r55d7c.jpg
On the bottom of the yellow bit, this was all taped up when I got my car. When I took the tape of I could feel a slight difference (didnt feel as good). Is there meant to be a vac pipe or something going of here to somewhere?
Cheers Matt
the yellow thingy is a non return valve for the vacuum servo. if it is leaking, get a replacement.
Cant see in the pic, But if its got a nipple coming off it, it prob went to the carbon canister, Not needed what ever, Just block it
Yes there should be a pipe connected to it but if you can see a spare pipe doing nothing then it needs to be replaced with the normal valve.
This will also give you running problems as your drawing air so the mixture will be running lean.
If you need a valve give us a shout
Cheers
Andy
Overkill replacing the whole thing when just blocking it, so its airtight is fine imo.
Overkill replacing the whole thing when just blocking it, so its airtight is fine imo.
sorry, but a leaking servo valve is dangerous. and a bit of leccy tape isn't enough to fix it. a new pipe & valve is the way to go.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.