c14se vac pipes

[swedge]

stupidly forgot to take a pic before i removed it all but anyone got a c14se (coilpack) that can check this and tell me where the vac pipes connect to

http://i228.photobucket.com/albums/ee127/swedge87/31e55953.jpg
the one on the bottom on the far right and left are water yeah?




http://i228.photobucket.com/albums/ee127/swedge87/754573cb-1.jpg

i know the big 1 is the breather

[Lewis.]

do these help at all?
http://i658.photobucket.com/albums/uu307/hay_lewis_68/DSC01065.jpg

http://i658.photobucket.com/albums/uu307/hay_lewis_68/DSC01064.jpg

http://i658.photobucket.com/albums/uu307/hay_lewis_68/DSC01063.jpg

[swedge]

so 1 from the back goes to the map sensor what about the other 1?

i dont have the carbon canistor thing

[Lewis.]

yeah, back one to the MAP sensor, and the one on the bottom goes to the thick servo vacuum pipe, and the end of the manifold goes to the FPR

[phazer]

The one at the very end of the plenum (right hand side as you look at the front of the car) goes to the fuel reg on the fuel rail.

[phazer]

lol too slow

[swedge]

i dont think there is a take off on my servo pipe?

[Lewis.]

it should have one. on the back of the one way valve. you can see in the second picture.

edit, if it doesn't, then i've seen them with a blank on the bottom spiggot before

[swedge]

so if it dosnt i just put a bit hose on with a bolt or something in it

[Lewis.]

so if it dosnt i just put a bit hose on with a bolt or something in it

yeah, i would have thought that it would have one though

[swedge]

ill go check in a sec

[swedge]

definitely dosnt have 1

the car was originaly a 1.0 so dont know if that has anything to do with it

[swedge]

couls i just T that into 1 of the other vac pipes?

[Lewis.]

I think it takes the vacuum from the TB to the one way valve. try it as it is and see how it goes mate. you will probably be fine. if not you could get the servo hose off a 1.4

[phazer]

A Nova SRi C14SE has two vac take offs on the one way valve. They are around £7 IIRC from the dealer if it's the easiest way for you to do it.

[Vausey_Nova_Knotla]

mine is just blanked off mate..

[Vausey_Nova_Knotla]

whats the one coming off the intake hose for i dont have that on my intake hose but my engine is a c16se but thought these were pretty much based on each other?