View Full Version : High spec C20let Breaking
Kev Turbo
31-03-11, 11:21 AM
Hi I have the following for sale,
· C20LET Engine,
Only covered 500 miles since rebuild including the following…..
Accralite pistons, ARP rod bolts, Full bottom end freshen up
Comeic 1.9m head gasket, sbd Vernier pullys,Xe cam dialled in, Fresh cambelt and tensioner kit, Crackle finish rocker cover.
This is a great engine ready to bolt your turbo and loom on and have many miles of trouble free motoring………. £800 ono
http://i707.photobucket.com/albums/ww78/kev_vaux/new2491.jpg
· Slimline rad with kenlowe twin fans and samco pipework for nova - £100
http://i707.photobucket.com/albums/ww78/kev_vaux/IMG_1080.jpg
· Nova C20LET High quality FMIC kit – All hoses and hardpipes included, Not your usual rubbish, Baily Dump valve, Mikilor hose clips throughout, Ideal for big BHP application. - £300
http://i707.photobucket.com/albums/ww78/kev_vaux/IMG_1077.jpg
Kev Turbo
31-03-11, 11:28 AM
http://i707.photobucket.com/albums/ww78/kev_vaux/288.jpg
Danb1987
31-03-11, 11:37 AM
Such a shame your breaking this mate! Wish I had the money for the engine :(
Sorry to spam but good look with selling everything.
F28 Nova Rose jointed linkage - £50
is that posted?
also do you have the lowered front tie bar setup??
joe
p.s · Immaculate Nova Gsi Interior – Wont find better, no rips etc. £12
thats a bargin ;)
£50 delivered for the header?
Kev Turbo
31-03-11, 06:43 PM
Joe,
Tie bars will stay on shell,
Lol @ interior its £120
I could do it for £52 postd
Kev Turbo
31-03-11, 06:43 PM
£50 delivered for the header?
Yes maz i would do that as its you
ok mate paypal ok?
Are the tiebar brackets the lowered ones? and alloy blocks and the bottom arm end??
Would you not sell them seperatly? can send replacement bits up if you need them to keep the shell rolling
Kev Turbo
31-03-11, 06:47 PM
ok mate paypal ok?
Are the tiebar brackets the lowered ones? and alloy blocks and the bottom arm end??
Would you not sell them seperatly? can send replacement bits up if you need them to keep the shell rolling
I will check for you
Is the bumper included with the fmic set up? Any pictures with the bumper off?
Kev Turbo
31-03-11, 07:22 PM
Yes it is Graham,
I can get you a picture
Cheers mate I'll send you my number, I've been working in Shrewsbury all week as well
Kev Turbo
31-03-11, 07:49 PM
your only 40 mins down the road worst case
Tommy_nova
31-03-11, 08:33 PM
Real shame to see your braking Kev
Whats happening with the shell,, any body parts up for sale wings doors ect
back home in Gobowen this weekend could pop by for a look ..
Kev Turbo
31-03-11, 10:09 PM
the shells is staying whole mate its too good to break!
whats your paypal mate for the linkage
Kev Turbo
31-03-11, 10:12 PM
kev_bradford@hotmail.com
paypal as a gift
may be a week or so until i remove it!
novaboyopr
31-03-11, 10:33 PM
hi mate. always one of the novas i loved.
any close up pics of the brakes and will they fit under 15s
cheers
Kev Turbo
31-03-11, 11:43 PM
pm sent novaboyopr
novaboyopr
01-04-11, 08:36 AM
Got the pic. Will they squeeze being 15s though
Kev Turbo
01-04-11, 09:24 AM
I am not sure mate as i dont have any to try???
Sure you could work some magic on them?
novaboyopr
01-04-11, 10:59 AM
Well don't wanna part with loads of money to find they dont fit and then have the hassle of trying to make them fit which could take a lot of time and money. Have you got any measurements for them. Ie discs size
Kev Turbo
01-04-11, 11:01 AM
if i had to put £1000 on it id say its going to be a tight squeeze in there but all depends on your rims,
Only way to know is to try and that could be difficult due to distance
Rickardo
01-04-11, 11:05 AM
I had 288mm behind 15" Slabs and Cesaros.
There was no room for any weights. It was extremely tight.
308mm, i wouldn't bet on them fitting.
jamieelston
01-04-11, 02:29 PM
hi kev , very very interested in the breaks you have for sale , coud do with picking them up asap if you could give me a call on 07890077930 or send me your number and i will call kind regards jamie
Kev Turbo
01-04-11, 02:42 PM
txt sent
Kev Turbo
01-04-11, 03:15 PM
Brakes prov sold to Jamieelston
Kev Turbo
02-04-11, 05:01 PM
Engine spec also includes coscast head and lightweight bottom pulley
Kev Turbo
02-04-11, 05:01 PM
Brakes gone
matthew172
02-04-11, 06:52 PM
any exhaust gen ?
Sorry Kev, PM me a paypal address and i'll fire the money over..
Kev Turbo
03-04-11, 11:26 PM
any exhaust gen ? Hi Matt
Here is some pictures
http://i707.photobucket.com/albums/ww78/kev_vaux/IMG_1081.jpg
http://i707.photobucket.com/albums/ww78/kev_vaux/IMG_1082.jpg
It needs a good wipe over but is in very good condition with all brackets and clamps
Let us know mate its a good price!
Kev Turbo
03-04-11, 11:27 PM
Sorry Kev, PM me a paypal address and i'll fire the money over..
its sold sorry mate as i didnt hear from you and someone sent a payment
Kev Turbo
03-04-11, 11:37 PM
didnt hear from you for 3 days so assumed you were not interested
Sorry for the confusion
:mad:
because if I wasn't interested, I wouldn't have asked in the first place.....
Kev Turbo
03-04-11, 11:58 PM
if i held everything anytime anyone shown any interest i would never sell anything
One in five are usually genuine buyers on these forums so if a sale comes up and i have no agreed deposit then i have to sell
Sorry for the inconvience
What eds phase this running or is it aftermarket??
Is it for sale?
Kev Turbo
04-04-11, 12:23 PM
Autronic sm 2 ecu
For sale
On migweb
Kev Turbo
04-04-11, 12:47 PM
It's on autronic sm2
Full package is for sale
For £650 Ono
Everything to run on a let
ok mate not to worry after some eds chips
nova mad dan
04-04-11, 06:46 PM
hi mate is the dumpvalve for sale if so how much ?
also is it single or twin piston
cheers dan
Kev Turbo
04-04-11, 06:50 PM
its included in the intercooler kit as the pipe work is made up for it
sorry
Can you pm me your number mate to arrange coming down for the fmic set up?
Kev Turbo
04-04-11, 11:07 PM
pm sent
sr-rompa
05-04-11, 05:54 AM
hi mate what have you got still for sale off the car ?
Cheers Kev I'll give you a call closer to the weekend
Kev Turbo
05-04-11, 07:04 AM
everything thats listed is still avalible
bodleyhenley
05-04-11, 07:43 AM
Interested in Turbo setup. PM sent. :)
Kev Turbo
05-04-11, 08:00 AM
PM Sent
You selling the seats aswell mate
Kev Turbo
05-04-11, 01:44 PM
Yes the seats are avalible but i have someone coming to look at the shell on Saturday and he may have the lot,
If not yes the seats are avalible!
Hi Kev,
Your inbox is full fella....... What clutch/flywheel combo does the car have and is it available? If so please send me spec/condition via pm please.
Nick.
Kev Turbo
06-04-11, 05:58 PM
replied ;)
Kev Turbo
08-04-11, 08:20 AM
back up fro FRIDAY!!!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.