redtop fuel pump wire?

[chug1106]

alright folks

got a redtop conversion,what stripped shell down etc,now putting back together,but the person who had wired it,has a connector on the thin blue and red wire and also the blue and red thick on. coming out of the fuel pump,
which one do i need to use for the power to the pump? is it the thin one or thick?
what would he have t'd into the other one for?

[Nobby]

ENGLISH?????

Anyway you will have a thick blue and red wire as sort of explained coming from your engine loom, this needs to go to the + on the fuel pump and then the - on the pump needs putting to a earth... Simples! :D

[chug1106]

sorry mate my dyslexia give me problems sometimes

what i meant was at the fuel pump relay,you have a thin red and blue and a thick red and blue,
which one do i use to go to the pump

[Paul]

The thick one goes to +ve on the pump.

[chug1106]

cheers mate

[burgo]

the thing red/blue is the switched live for the heating element of the lambda sensor

[chug1106]

do you tee in to the thick red and blue wire or do you cut it and just connect it. as in from the relay?