exhaust maifold to system

[kiwinova]

any ideas on joining these together:confused:

http://i664.photobucket.com/albums/vv5/kiwilad99/saloon/IMG_0406.jpg
http://i664.photobucket.com/albums/vv5/kiwilad99/saloon/IMG_0405.jpg

system is s/s not sure on the manifold tho

[blue_peg_16v]

chop both flanges and weld in a flexi

or gring off the bit that sticks past the flange in the first pic and use a doghnut gasket as on normal nova systems

[mowgli]

go & ask the local fast fit bloke if you can have a look in his stock of exhaust seals.....

[Mike]

Your missing two large bolts with springs (to give a flexible coupling) an a dome'ish shaped gasket.

[kiwinova]

cant weld s/s with my welder

and never got the bolts with the system

[Mike]

cant weld s/s with my welder

You probably can, you just dont actually know it yet.

Change the wire reel & gas over & hey presto.

[Pistol Pete]

go & ask the local fast fit bloke if you can have a look in his stock of exhaust seals.....

This. Should have what looks like a load of wire pressed into a ring. Also ask him for some bolts, nuts and springs.

[16v Nova Kev]

i weld s/s with normal mig wire. obviosly it will rust but works

[16v Nova Kev]

http://i244.photobucket.com/albums/gg8/16vnovakev/04022010069.jpg

[Steve0011]

one of these kits

http://cgi.ebay.co.uk/astra-mk4-exhaust-fitting-kit-bolts-gasket-springs-/130490860598?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item1e61dc8436

:)

[Nobby]

i weld s/s with normal mig wire. obviosly it will rust but works


:thumb: