Locking Wheel Nuts - No Key???

[KSRY]

Well I've bought a car with locking wheel nuts and theres no key been supplied, its been written off and I bought it for the engine and, the wheels, any ideas? So can't ask the previous owner and it doesn't look a sntadard wheel nut to me

[Mike]

Weld some bolts on the end of the locks or get a locking nut removal tool.

[MK1_Ben]

As above, or you can just hammer a socket onto them providing they aren't siezed.

[Mike]

As above, or you can just hammer a socket onto them providing they aren't siezed.

Or completly round Tuner style locks.

[swedge]

if its scrapped drive it slowly with only that nut still in and itll lossen off







i take no responisbility for any damage or hurt gained from the above post, it was posted as a suggestion and not an order and does not have to be done lol

[toolsydave123]

ive found that an air chisel with a bluntish point on the end always works a treat

[KSRY]

Thanks guys will give them a try, thanks for your help

[bai1ey]

halford do hammer on locking wheel nut removel tools for about a tenner then they can be used next time

[shed-on-wheels]

i use sockets that are designed to undo rounded nuts if its the type that just spins chisle the outer edge off first hit a socket on the use and inpact drive and a big hammer lol

[Ben]

Or completly round Tuner style locks.

I have never found a wheel nut that i cant hammer a socket onto.

[auzzy-b]

I had this problem. Bought these

http://i600.photobucket.com/albums/tt87/austen-b/Photo0101.jpg

But they are rubbish!

So resorted to this

http://i600.photobucket.com/albums/tt87/austen-b/Photo0102.jpg

Was really easy. Material is only soft so drill them in no time! Then kick the wheel and it will fall off lol

[t45_ste]

Maybe follow this how to.............

http://www.dslreports.com/forum/r23383074-Photos-How-not-to-remove-a-seized-wheel-bolt





















Or not