View Full Version : Slabs over V6s?
novadoneitthistime
10-03-11, 09:14 PM
Will 15" Cav Slabs fit over V6 calipers and 280 discs?
LEWI007
12-03-11, 11:07 AM
Mine did
http://i253.photobucket.com/albums/hh57/LEWI007/Nova/130620101065.jpg
yes mine did just very close :)
MattBrown
12-03-11, 11:49 AM
I needed a small spacer when running brand new disks and pads.
Due to the caliper catching the inner sides of the spokey part.
LEWI007
12-03-11, 01:09 PM
That photo there of mine was brand new 288MM Discs and pads, i didnt need any spacer or anything it just fitted.
lewi thought you used 280mm meriva discs?
craig green
12-03-11, 02:47 PM
Mine did with brand new discs & pads (Vec 288's)
I needed spacers on mines :thumb:
LEWI007
12-03-11, 03:42 PM
lewi thought you used 280mm meriva discs?
Oh yes i think i did i cant really remember.
Vectra V6 Calipers
Vectra V6 Brake pads
The discs to go with that SHOULD be Vectra GSi V6 288MM discs 5 stud and redrilled.
But 280MM Meriva 4 stud ones fit straight on, theres obviously an 8mm difference on the discs but its the calipers that would catch on the wheels not the discs.
So all is good :thumb:
Surely the diameter of the disc won't make a difference, as the calipers stay in the same location... its the disc depth (both of the disc face and mounting depth) that will push the sliding caliper out a bit further?
LEWI007
12-03-11, 04:56 PM
Yes and i think meriva and vectra ones are same.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.