View Full Version : Rcl non-vaux
Right so my gf has a sturbo and it has central locking
She bought one of those remote central locking kits from eBay and she's expecting me to fit it
Since her car already has central locking the doors should have the actuators or whatever thier called installed already
If it does will I be able just to wire into them from the eBay kit?
Yarp, should be ok. I did it on my Celica no problemo.
Does it have a lock control button? You could just splice it into that.
What do you mean by a lock control button?
erm the answer is in the question chap....
Do you mean a button that locks and unlocks all the doors?
LOL yeah. The celica has a button on the drivers side arm rest that locks and unlocks both doors.
what a palava that was today lol
i removed her cd player to use the feed from ther for the kit and the wiring behind it was attrocious (sp?) masking tape everywhere haha
anyway im a bit confused with the wiring now
in the kit it says theres 3 wires for the main solenoid and the others have 2
the switch for locking all the doors is located in a little panel with 9 wires going into it as theres other switched there for the windows etc
how do i figure out which wires are for the central locking? put my multimeter on each wire and hit the switch and see which one changes?
Have you got white/blue, black, and black/blue wires going to the door lock/EW switch panel? Good chance Toyota would have used a standard wiring colour across their range, so I'm looking at my GT4 diagrams. Those will be your door lock wires.
will have a look tomorrow as she isnt here now
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.