novarobbo
28-02-11, 12:01 PM
right im thinking about buying a vitara to play about in so ideally im wanting interest in parts so if they sold i'd know where i would stand with money :thumb:
i know theres a fair few cav owners on here so thought i'd advertise parts on here!
20XE unknown milage but while it was out of the car it was stripped (bottom end was pressure tested and was fine so left alone, the head sent away to be stripped, skimmed/pressure tested that was all fine the head was then built back up with new valve stem seals and new cam seals ect
the bottom end had new crank seals and a new oil pump gasket, it also had a new cambelt kit at the time of being built back up, also has the breather mod done and fitted a 8v sump gasket/baffle plate
EML is on and comes up with the hall sensor but i think its the loom thats nackered tbh
£300
Biltein yellow big piston shocks all round done around 3000 miles but come with 2 spare sets of front bilstein shocks
£125
Sparco Upper Strut brace (black)
£50
Rear beam with powerflex bushes & rear arb
£70
5 stud conversion using new cavalier v6 front hubs and wheel bearings and new v6 rear abs rings/hubs, the front brakes are Cavalier turbo 284mm EBC drilled and grooved discs with ferodo DS2500 brake pads and the rear are just standard v6 discs and pads.
whole lot £175 or with rear beam complete with the stub axels £230
De-badged grille from germany
£20
Sri boot spoiler
£20
Colour coded boot panel
£35
Twin air bag dash in mint condition
£ offers?
Calibra centre dials come with a length of wiring £50
Cavalier Turbo front seats with v6 leather rears front have abit of wear and drivers has been patched up
£80
vectra handles recently been painted
£20
sportex back box done around 300 miles
£50
any other bits just ask im sure ive missed bits
http://i22.photobucket.com/albums/b339/cavvie/marcscavalier.jpg
http://i22.photobucket.com/albums/b339/cavvie/marcscavalier1.jpg
http://i22.photobucket.com/albums/b339/cavvie/marcscavalier2.jpg
http://i22.photobucket.com/albums/b339/cavvie/marcscavalier3.jpg
i know theres a fair few cav owners on here so thought i'd advertise parts on here!
20XE unknown milage but while it was out of the car it was stripped (bottom end was pressure tested and was fine so left alone, the head sent away to be stripped, skimmed/pressure tested that was all fine the head was then built back up with new valve stem seals and new cam seals ect
the bottom end had new crank seals and a new oil pump gasket, it also had a new cambelt kit at the time of being built back up, also has the breather mod done and fitted a 8v sump gasket/baffle plate
EML is on and comes up with the hall sensor but i think its the loom thats nackered tbh
£300
Biltein yellow big piston shocks all round done around 3000 miles but come with 2 spare sets of front bilstein shocks
£125
Sparco Upper Strut brace (black)
£50
Rear beam with powerflex bushes & rear arb
£70
5 stud conversion using new cavalier v6 front hubs and wheel bearings and new v6 rear abs rings/hubs, the front brakes are Cavalier turbo 284mm EBC drilled and grooved discs with ferodo DS2500 brake pads and the rear are just standard v6 discs and pads.
whole lot £175 or with rear beam complete with the stub axels £230
De-badged grille from germany
£20
Sri boot spoiler
£20
Colour coded boot panel
£35
Twin air bag dash in mint condition
£ offers?
Calibra centre dials come with a length of wiring £50
Cavalier Turbo front seats with v6 leather rears front have abit of wear and drivers has been patched up
£80
vectra handles recently been painted
£20
sportex back box done around 300 miles
£50
any other bits just ask im sure ive missed bits
http://i22.photobucket.com/albums/b339/cavvie/marcscavalier.jpg
http://i22.photobucket.com/albums/b339/cavvie/marcscavalier1.jpg
http://i22.photobucket.com/albums/b339/cavvie/marcscavalier2.jpg
http://i22.photobucket.com/albums/b339/cavvie/marcscavalier3.jpg