View Full Version : Bucket seats
Can people please post pics of their bucket seats in the car. I think like an idiot ive welded my seat rails in too high!
MattBrown
16-02-11, 11:37 AM
Some in my project thread fella.
Heres mine but with only two bolts holding them in (because the legs were uneven)
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc3/29662_395935364925_637964925_4350831_5877152_n.jpg
my seat rails were 3/4" box section, and had about 1/2" clearance off the floor, so the mounts sat roughly 40mm or so off the floor, quite low but that's how it felt best to me, sat like so:
http://i113.photobucket.com/albums/n225/lynz_sr/Trax/DSC_0158.jpg
You just found that pic or something? lol
I put my rails in as low as they'd go, they're very close to the floor by the sill. Also used threaded inserts so not to make it any higher, you welded nuts to the top didn't you?
Maybe some adjustable sidemounts can help lower them slightly?
yours must be lower than mine, mine sit on standard gte subframes so they adjust. r1ch's old seats
http://www.pngclub.com/forum/viewfeaturecar.php?ref=3390
why not sit them on original frames like rich says. thats what i did years ago.
If he has side mount buckets, which all the serious ones are then you can't.
Mike B GTE
16-02-11, 04:13 PM
dont know if these will help
http://i196.photobucket.com/albums/aa201/M16KEB/P1050957.jpg
http://i196.photobucket.com/albums/aa201/M16KEB/P1050959.jpg
http://i196.photobucket.com/albums/aa201/M16KEB/P1050900.jpg
Why do you think they are too high Paul?
I assume the seat will actually fit in?
You just found that pic or something? lol
I can find it easier than most of my others lol
Why do you think they are too high Paul?
I assume the seat will actually fit in?
Theyre too high i think but they do fit in, ill take a pic tonight
http://i214.photobucket.com/albums/cc250/Mieran2010/Nova%20L/SNV84365.jpg
http://iainel.co.uk/images/forums/NovaWIP2/345.JPG
http://iainel.co.uk/images/forums/NovaWIP2/351.JPG
novaboyopr
16-02-11, 06:28 PM
http://i397.photobucket.com/albums/pp52/millsey123/InteriorSeats.jpg
http://i397.photobucket.com/albums/pp52/millsey123/22082009084.jpg
how they sit height wise.
http://i397.photobucket.com/albums/pp52/millsey123/InteriorRear.jpg
MARTIN KELSON
16-02-11, 06:50 PM
Hi Paul
Not got any real good ones of mine, but this is what i have
http://i12.photobucket.com/albums/a220/NOVAMARTIN16V/DSC03427.jpg
Section of centre cut out here for drivers seat & boxed back in to move seat towards the centre to reduce the feel of drivers seat not inline with steering wheel!
http://i12.photobucket.com/albums/a220/NOVAMARTIN16V/DSC03426.jpg
http://i12.photobucket.com/albums/a220/NOVAMARTIN16V/DSC03665.jpg
http://i12.photobucket.com/albums/a220/NOVAMARTIN16V/Picture009.jpg
Hope this helps a little :)
Martin
my seat in the nova
http://i421.photobucket.com/albums/pp297/jonny057/DSC02128.jpg
Mine using the original GTE runners
http://i5.photobucket.com/albums/y191/mrmazz/Nova/Image0169_Small.jpg
http://i5.photobucket.com/albums/y191/mrmazz/Nova/DSC_0006_Medium.jpg
http://i5.photobucket.com/albums/y191/mrmazz/Nova/DSC_0010_Medium.jpg
http://i5.photobucket.com/albums/y191/mrmazz/Nova/Image0101_Medium.jpg
http://img.photobucket.com/albums/v485/DPursey/2007%20Mods/DSC06088_640x480.jpg
Not mine but you get the idea
http://img.photobucket.com/albums/v306/Jatec/Bens%20Nova/P1000361.jpg
Paul, in my corsa build thread in my sig there's some quite detailed pics of my weld in rails. Once I'm home an not using mobile internet connection ill measure them up an give you some exact dimensions. Please don't tell me you welded the mounts in without having some seats to measure off first tho???
Thanks for all the responses, Looking at the pics, I dont think mine are too far out:
http://img.photobucket.com/albums/v14/lashednova/acee166b.jpg
touch higher than usual maybe, but mine were never on the lowest setting on the mounts so it should be fine. Mine were sat pretty low anyway as I found it far more comfortable on my feet
ste porter
16-02-11, 11:07 PM
depends on the seats and mounts used aswell mate
my old fiberglass seats sat very low on my rails with about 10 inches or so from the roof but my raceland full sided seats sat about an inch below my main cage hoop on the same rails
Heres some pics of mine
http://img.photobucket.com/albums/v420/twag/DSC00189-1.jpg
http://img.photobucket.com/albums/v420/twag/SDC10819-1.jpg
http://img.photobucket.com/albums/v420/twag/SDC10817-1.jpg
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.