GSi engine with weber 32/34

[danielyoung]

Might be buyin a Gsi engine but want to run it on weber 32/34. I know it will be produce less power than if it was with the injection but cant be arsed with changin the fuel lines and tank so what i need to find out is what inlet manifold will i need to get hold of? and will the coil and things work properly without the ecu?

[Ste_Nova]

easier to change the tank and lines...... you would have to source 1.4sr coil loom and dizzy

[Dicko]

change it to injection dan its not much of a hassle really. but your probly lookin at ?60 for parts with tank+pump and new lines/hoses

[mikeoxford]

changing to Injection is VERY easy from a 1.4

dont even bother with tank and lines if you cannot be arsed

we ran a 2ltr 8v using the cavalier pump on the end of the fuel line in the engine bay :twisted:

worked fine we found.

if you keep the weber 32 34, i had a crap 1.6 head with square ports and a mathcing manifold i saw 93 bhp.

if you do do the weber 32 34, you want a head of a 1.2 or 1.3 with castellated ports and matching manifold of an SR