Underseal question

[L14MNP]

Is there anything available that brushes on and leaves a finish like Upol Gravitex?

The only brush on stuff I am aware of is that Tetroseal muck. I am stripping the old off at the minute and painting in red oxide, and want to apply underseal again then brush paint the body colour on top.

I haven't got the right enviroment to spray it on with the compressor, how mess is a schutz gun?

[Edd]

You can get U-Pol Gravitex in a can it's called Graviguard

I've used it before, looks exactally like Gravitex, I also applied it to the whole underside with the car being on axle stands

[Benn]

You can paint most of them on, spend the money tho and get the 3m rubberised sealant. Its amazing stuff. I'll be doing mine with it next week.

[Andy]

You got it liam,tetroseal and waxoyl are complete dog muck indeed.
As benn said the rubberised stuff is the best,a mate of mine from round here did his Nova with summat called raptor x and thats absolutely rock solid stuff,imagine a polybush strength of rubberised underseal lol

[draper]

ask lionel, he must of tried 3 or 4 different products on his lol

[bazil]

Shutz is horrible stuff. I'll not used it in 12 years and never will use it again,

[VnoNovaD]

Youre not doing it right.

http://i439.photobucket.com/albums/qq113/volvosneverdie/baby_seal_under_police_car_02.jpg

[Edd]

^ Wtf

[wwmnw]

Under seal, Edd.

I laughed lol :(

[VnoNovaD]

^ Wtf

Its an americal trying to underseal his car, with a seal.
Whats not to get?:roll:

[Edd]

Bout as funny as watching your sister get fooked by your brother :roll:

[draper]

Bout as funny as watching your sister get fooked by your brother :roll:

how can you laugh and masturbate at the same time tho :confused:


although my missus did once when i had brewers droop

[VnoNovaD]

Bout as funny as watching your sister get fooked by your brother :roll:

Didnt know Bridgewater was in Teeside.

Learn something new every day.

[Edd]

I popped up to see your Mum last week, done me a lovely breakfast

[draper]

did you pick my pants up edd, sure i left them hanging off the lampshade last time i was there

[Edd]

The whole bedroom floor was covered in them, I had a job working out which were mine let alone anyone elses

The Nan tastes better tho

:d

[NOV4_SPORT]

The whole bedroom floor was covered in them, I had a job working out which were mine let alone anyone elses

The Nan tastes better tho

:d


Thats just so wrong, but still made me lol.

iain

[draper]

i had chinese, not a big indian fan tbh

[Connor]

This thread turns from question about undersealing,
to incest gangbanging i less than a page
.... only on png lol

[Count Vaux Alot]

You can paint most of them on, spend the money tho and get the 3m rubberised sealant. Its amazing stuff. I'll be doing mine with it next week.

Agreed :)

[L14MNP]

Err thanks(!) lol

Edd, Andy, Benn any links to the stuff you mention? I guess I can find Edds and Andys easy enough, the stuff you all mention seem like the stuff I am after! I'll have a look at the 3M products now. I know it's good gear and I don't mind paying for it, it's just finding the right tuff for my needs that can be tricky! Waxoyl goes nowhere near my stuff btw! Hate that sh!t. lol

Rep for those I can.

[Iain]

ask lionel, he must of tried 3 or 4 different products on his lol

TWO actually lol I used my beastly compressor to gun on some 3M stonechip with a Schutz gun though. Imagine if you poured it out and dabbed it on you'd get a nice textured finish.

[Andy]

stonechip is good for sills but poor,very poor as an actual underseal.It simply aint thick or stone/debris resistant imo

[L14MNP]

Link me up (if you can) Andy. I eBayed and Googled it and got SFA back. lol

[MK999]

The way you use parcel tape, that should do the trick imo.

[Iain]

stonechip is good for sills but poor,very poor as an actual underseal.It simply aint thick or stone/debris resistant imo

I'm off outside to strip the underside of my car for the fifteenth time then.

[L14MNP]

lol. It's only 70p a roll. Share the wealth!

It may trap water though.

[Andy]

Link me up (if you can) Andy. I eBayed and Googled it and got SFA back. lol
Ive tried,apparently its american,i'll try and find out off him where it was from mate,i'll send him a text now;)

[Andy]

found it,upol raptor truck bed liner apparently
theres a forum which say about its "urethene" texture lol i was right and am not gay lol

[Andy]

http://t0.gstatic.com/images?q=tbn:ANd9GcQZ17t0meK01D_yk7DUKaKI_7GHGj2NU hch2hI3QGyeLMJVKWMNew
here

[L14MNP]

Smashing mate. :thumb:

My mates XR2 has the bed liner stuff sprayed on the interior for some reason lol
http://i154.photobucket.com/albums/s247/eurojdmp11/mk1%20xr2/BKN%20495Y/DSC00154.jpg

Crap pic, but you can kinda see it. Nice finish, but I did question it's purpose in there. lol

Will do some Raptor readin now. :cool:

[Benn]

I've look on Ebay before for the stuff i use, cant find it. Can get it from paint retailers tho.