PDA

View Full Version : Astra Digi LCD Clocks



novajulz
27-01-11, 01:19 PM
Hi all bought a set of Astra GTE digi clocks off a friend to fit them in to her MK1 Nova, but anyway i belive im missing something like a sensour or a Transponder :confused: . As these are my first set of digi clocks. Im sure you guys can tell me what i need to get them fitted.

Pics to follow to show you what i have all together



Cheers all Baz /julz's other half
http://i326.photobucket.com/albums/k423/novabazjulz/Picture0231.jpg
http://i326.photobucket.com/albums/k423/novabazjulz/Picture0234.jpg
http://i326.photobucket.com/albums/k423/novabazjulz/Picture0232.jpg

Andy
27-01-11, 01:23 PM
A transponder from an Spi Nova will be fine,it screws into the speedo drive on the gearbox

novajulz
27-01-11, 01:31 PM
Ok cheers will have to have a look for one of them. Pics above have a good look and please tell me what eles is missing. Thanks

Andy
27-01-11, 01:38 PM
That 1st pic is the transponder,its all there mate

novajulz
27-01-11, 01:46 PM
Ok thank you very much for your help. One quick question the transponder in the pic has 3 wires coming from it, do i need to connect them to anything? And also does anything screw on top of the transponder?

Southie
27-01-11, 02:51 PM
Also when fitting to mk1 dash you might want to have a read through this: >LINK (http://web.archive.org/web/20070224054255/www.tws.serveftp.net/novaland/howto/database/NovaUk+Mk1+Digi+Dash+Page.htm)< ;)

brainsnova
04-02-11, 10:32 PM
Ok thank you very much for your help. One quick question the transponder in the pic has 3 wires coming from it, do i need to connect them to anything? And also does anything screw on top of the transponder?

The 3 wires are needed and the hole in the top is where the speedo cable goes on the 1.2spi.

novajulz
11-02-11, 05:58 PM
is it possible to have the clocks lit up without it all being wired up so that i know wether its tick or curve?? cheers

tommy8252
11-02-11, 06:34 PM
all brown wires on battery positive and all black wires on battery negative (or maybe other way round) :confused:

bmw156
11-02-11, 06:36 PM
is it possible to have the clocks lit up without it all being wired up so that i know wether its tick or curve?? cheers

put a torch in front of it!

novajulz
11-02-11, 06:46 PM
tried to do all black and brown but all i got was a little green light

tommy8252
11-02-11, 06:47 PM
sounds like the bulbs in the dash are blown then

novajulz
11-02-11, 07:32 PM
Ok just tried all the black/brown wires n they showed left/right indicator and handbrake light. So took the bulb out and put a torch through the hole and found out that i have the Tick type.