looking for brake unions

[Rich]

Im in need of a m12x1 fitting for my braided brake lines, just one needed for the master cylinder. Im having trouble finding anything online, rallydesign have everything i need except this one fitting, i rang them yesterday and the guy told me they dont do any m12 fittings.

Cant beleive i cant find somthing so simple, this is what i need (but obvs m12)
http://www.rallydesign.co.uk/product_info.php?cPath=85_248_249&products_id=1517

Anyone help?

[Pistol Pete]

Phone them. I had the same issue when i did mine. I bought some ready made lines aswell!! They sent one out ASAP.

[Rich]

phone rally design? i did yesterday and the guy on the phone told me they dont do any m12 fittings? what exactly did you order?

[Pistol Pete]

These...http://www.rallydesign.co.uk/product_info.php?cPath=85_1923_1212_1337&products_id=10012

Where the copper line feeds into the regulator valve, ones an M10 and ones an M12. Both were M10. So i chopped the flare off, fitted an M12 and reflared. Job jobbed.

See my original thread..http://www.pngclub.com/forum/showthread.php?t=144717&highlight=brake+lines

[Rich]

ah i see, im running braided brake lines on mine, so the fittings are different, they screw onto the braided hose, no flaring involved

[Pistol Pete]

Ah, i read braided and assumed you meant from caliper to line. Not full length of the car!!!

[tom reid]

Try here, always been helpfull in the past.
http://www.goodridge.net/webapp/wcs/stores/servlet/topcategories_-1_64_10551

[Adam]

http://www.merlinmotorsport.co.uk/advanced_search_result.php?keywords=m12

[Rich]

thanks adam, they have banjo bolts to fit, just 4x the price of the m10 bits rally design do lol

Ive found this, which would be perfect but says its -4 ens hose fitment? bigger than the 3/8 hose on rally design?

http://www.speedflowshop.co.uk/-4-ens-to-male-m12-x-10mm-dual-seat-or-washer-seal-254-04-114-p.asp

going mad shifting through all this crap! lol

[kevster]

try this one rich, will keep looking for a bit before bed time lol
http://helperformance.com/catalogue/adaptors/adaptors-2.php

[kevster]

http://www.abbeyhose.co.uk/

or this one lol

[kevster]

or this one
http://www.thinkauto.com/

try them ,if no good im sorry :)

[Cheeze]

What i done myself was to take the end cap off the regulators think they are black or silver, and replace it to the one i needed if you follow me, so both regulator ends are now m10 fittings.as one is m10 and the other m12.

Im only running one line to the rear so i just blanked the spare port off