PDA

View Full Version : Dewoo 1.5 rofl



16v Nova Kev
18-01-11, 02:08 PM
one of these in my local scrappie. What's worth nicking off it

bazil
18-01-11, 02:09 PM
Don't even know what that looks like lol

16v Nova Kev
18-01-11, 02:14 PM
nexia should of said

bazil
18-01-11, 02:25 PM
Ah the astra one lol

Angus Closier
18-01-11, 02:33 PM
One of my teachers races these, there are a few bits that can be used on the vaux side of life. IRRC the wheels are the right offset etc...dont quote me. Engines and stuff has a few minor diff's but not much.

mowgli
18-01-11, 02:47 PM
engine is fairly low spec.. gearbox is ok, fuel pump etc ok...

bazil
18-01-11, 02:51 PM
There has been one converted to a astra gte 16 v on mk2.com lol

mowgli
18-01-11, 02:59 PM
There has been one converted to a astra gte 16 v on mk2.com lol

hardly difficult, really

Edd
18-01-11, 03:08 PM
Same shell as a mk2 Astra ?

Southie
18-01-11, 03:14 PM
Same shell as a mk2 Astra ?
Yes, A GTE Astra owners dream come true when they brought it back out.

MK999
18-01-11, 03:15 PM
As said, the shell lol few astra mk2 bits and you have a brand new mk2 astra :)

Edd
18-01-11, 03:16 PM
Just got to find a japanese car company stupid enough to remake Nova's then

lol

ben doodar
18-01-11, 03:18 PM
There has been one converted to a astra gte 16 v on mk2.com lol

you got a link to the thread mate?

L14MNP
18-01-11, 03:27 PM
As said, the shell lol few astra mk2 bits and you have a brand new mk2 astra :)

I thought I would have seen loads of reshelled GTE's when the Nexia came about. As said, a dream come true.

16v Nova Kev
18-01-11, 03:32 PM
I was wanting its heart for my sr but the 1.5 bit was putting me of ever so slightly

Edd
18-01-11, 03:36 PM
Astra GTE 16v shells are different from other mk2 shells and probably nexia shells tho

Whole floorpan and bulkhead iirc perhaps why the Daewoo shells arnt used as much ?

Southie
18-01-11, 03:46 PM
you got a link to the thread mate?

Daewoo GTE Trackcar >LINK (http://www.astra-mk2.com/forum/showthread.php?8355-Daewoo-Astra-GTE-Track-car%21)<

L14MNP
18-01-11, 03:48 PM
Astra GTE 16v shells are different from other mk2 shells and probably nexia shells tho

Whole floorpan and bulkhead iirc perhaps why the Daewoo shells arnt used as much ?

I read something about them being different too. I assumed maybe inner wings/quarters etc nothing 'massive'. Like you say though, there must be a reason! :confused:

mayhem
18-01-11, 04:51 PM
almost everything is different. firewall, door hinges are in a different place, floorpan etc.

but.. the 1500 is running a f16 box, with smallblock shafts , so the inner cv's are used a lot overhere.

mowgli
18-01-11, 04:52 PM
the car is based on the astra 2 shell, but it got re-designed as the pontiac leMans, so it needed a big enough hole for the gm auto box etc... then the us crash protection stuff, then daewoo actually made them under contract for pontiac & then decided to make them under the daewoo brand

considering the mk1 & mk2 astras share their floorpan, it is still a mid seventies designed chassis...

Ernie
18-01-11, 05:10 PM
Just got to find a japanese car company stupid enough to remake Nova's then

lol
I will forward it to Honda as only down the road
lol

16v Nova Kev
18-01-11, 07:07 PM
almost everything is different. firewall, door hinges are in a different place, floorpan etc.

but.. the 1500 is running a f16 box, with smallblock shafts , so the inner cv's are used a lot overhere.

that will do for me:thumb:

Spudly
18-01-11, 07:41 PM
Daewoo GTE Trackcar >LINK (http://www.astra-mk2.com/forum/showthread.php?8355-Daewoo-Astra-GTE-Track-car%21)<




Was really getting into that untill page 18 when i saw he had ringed it:cry:

Damo
18-01-11, 08:38 PM
Was really getting into that untill page 18 when i saw he had ringed it:cry:

Yea me too really good built though.

bazil
18-01-11, 08:40 PM
Kev I might need a couple of bits, can you pm me where it is?

16v Nova Kev
18-01-11, 08:49 PM
Kev I might need a couple of bits, can you pm me where it is?


erm.........






















no.lol

bazil
18-01-11, 08:50 PM
:(

burgo
18-01-11, 08:50 PM
almost everything is different. firewall, door hinges are in a different place, floorpan etc.

but.. the 1500 is running a f16 box, with smallblock shafts , so the inner cv's are used a lot overhere.as in they are the same as mk2 cav inners?

16v Nova Kev
18-01-11, 08:51 PM
:(

its in the same place the mk1 door loon:thumb:

Damo
18-01-11, 08:51 PM
as in they are the same as mk2 cav inners?

If so this would be muchly handy.

Southie
18-01-11, 09:03 PM
Was really getting into that untill page 18 when i saw he had ringed it:cry:
I know :( I didn't want to spoil it though.

Spudly
18-01-11, 09:04 PM
I stopped reading after that as it put me right off:eek:

kevster
19-01-11, 12:57 AM
it was off putting , but still till then what a build

davidfox280585
19-01-11, 10:01 AM
ive got a nexia fuel pump in mine kicks out 4.2 bar as the xe only needs 2.7 according to autodata

mayhem
19-01-11, 03:44 PM
as in they are the same as mk2 cav inners?

yes.

make sure its running a f16 though, iirc there are a few 1500 versions.

almost every nova bigblock overhere with 22 spline shafts are using nexia inners (cav ones are NLS overhere)

burgo
19-01-11, 08:40 PM
yes.

make sure its running a f16 though, iirc there are a few 1500 versions.

almost every nova bigblock overhere with 22 spline shafts are using nexia inners (cav ones are NLS overhere)a new source of those cv's will have just made lots of people rather happy

mayhem
19-01-11, 09:00 PM
lol it's been known for years overhere

Ben
20-01-11, 10:56 AM
lol it's been known for years overhere

lol

People in the uk are lazy and just go for the tried and tested cav route!

mayhem
20-01-11, 04:41 PM
we are the same, but when you run out of cav joints, people find something else.

a few years ago massive money was made with this trick, only a few people knew about it, and bought them for 10 euro a set, selling them on opel forums for 50 a set lol

Southie
20-01-11, 05:19 PM
So would this be the correct one then? >LINK (http://cgi.ebay.co.uk/DAEWOO-NEXIA-1995-1997-1-5-OUTER-CV-JOINT-NEW_W0QQitemZ150542271499QQcategoryZ100910QQcmdZVi ewItemQQ_trksidZp4340.m263QQ_trkparmsZalgo%3DSIC%2 6its%3DI%252BC%26itu%3DUCI%252BIA%252BUA%252BFICS% 252BUFI%26otn%3D15%26pmod%3D150550821506%26ps%3D63 %26clkid%3D6505147164212275451)<

burgo
20-01-11, 05:27 PM
no thats outer, you want inner

bazil
20-01-11, 05:31 PM
is it 34 to 22 teeth??

bazil
20-01-11, 05:39 PM
daewoooooooooo 22.34 inner cv joints clicky (http://www.driveshaftstore.co.uk/index.php?searchMake=Daewoo&searchModelGroup=*&searchYear=*&search%5BpartType%5D=CV&search%5Bmake%5D=Daewoo&search%5Byear%5D=*&search%5Bside%5D=*&search%5Bengine%5D=1500&search%5BmodelGroup%5D=*&filterJoint=Inner&filterTransmission=All&x=91&y=13)