Rev limiter for c20xe on bike carbs?

[24sevenslacker]

just wondering if there is any sort of fuel cut or ignition limiter which works with bike carbs, not having any luck on any other forums...

[Danny s-p]

if you use a stand alone management like mega jolt or DTA yes but if not then no

[Iain]

I'm sure Nova Ian on here is planning to use a revlimiter with a coil setup. Have a search in his WIP.

[24sevenslacker]

cheers guys

[MattBrown]

if you use a stand alone management like mega jolt or DTA yes but if not then no

This is correct, but for a coil use an omex limiter.

All it does, is cut power to the coil

(massive bangs and flames when fiddled with)

[Danny s-p]

This is correct, but for a coil use an omex limiter.

All it does, is cut power to the coil

(massive bangs and flames when fiddled with)tell me more mat can i run this on a e16se on r1 carbs

[24sevenslacker]

coil and distributor cap?

[Andy]

http://cgi.ebay.co.uk/OMEX-REV-LIMITER-CLUBMAN-SINGLE-COIL-/260712979324?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3cb3b45b7c
one of those would do wouldnt it??

[24sevenslacker]

think thats what he just mentioned..... sweeeeet

[MattBrown]

tell me more mat can i run this on a e16se on r1 carbs

Course you can danny.

Get a full engine loom, dizzy, coil and amp off a 1.4sr nova, this goes streight onto your 1600 engine.

Then time her up roughly etc.

Get one of those omex limiters and go from there:thumb:

[24sevenslacker]

just had a look, might have to invest. like the look of the shift light too :)

[SR-Rally]

Ive got one on one of my rally cars, I haven't bothered setting up shift light but the limited is really easy to setup. You can set hard and soft limits on it to

[Danny s-p]

Course you can danny.

Get a full engine loom, dizzy, coil and amp off a 1.4sr nova, this goes streight onto your 1600 engine.

Then time her up roughly etc.

Get one of those omex limiters and go from there:thumb:think am usen a old cav carb loom

[24sevenslacker]

Ive got one on one of my rally cars, I haven't bothered setting up shift light but the limited is really easy to setup. You can set hard and soft limits on it to

is it reliable too? dont want it failing when im hammering it at drag strip....

[SR-Rally]

I've done a years rallying, flat out all night through fords etc and yet to have a problem so I'd say it's pretty good. Touch wood

[MattBrown]

think am usen a old cav carb loom


Be 10x easier to do what I said dude.

Don't have to mod the dizzy or loom plugs then.