View Full Version : Ignition leads
matty h
31-12-10, 08:11 PM
Where can I get a set ignition leads for a 2.0 8v vauxhall engine with 1.6 cavalier distributer.
Thanks Matty
shed-on-wheels
31-12-10, 08:33 PM
on ebay mate use nova gte items :D
matty h
01-01-11, 01:32 PM
Thanks I will take a look at a set before I buy.
matty h
12-01-11, 09:46 PM
Anymore info struggling to match the ones I need.
Thanks Matty
just buy 1.6 cavalier ones
matty h
12-01-11, 10:12 PM
Which ones there are loads of different sets.
quite simply, its down to the type of dizzy that is fitted.. post up a pic of the cap.
matty h
12-01-11, 10:34 PM
Its the vacuum advance one that is used for running carbs the need to have 90 angle end at the dizzy cap.
but is it bosch?? or siemens or delco??
matty h
12-01-11, 10:42 PM
bosch
ok, there a quite a few different bosch pin shapes.... some look like spark plug tops, some are about 8mm femal;e, some have small pins in them...
i'm serious about posting a pic of the dizzy cap
http://www.pngclub.com/forum/../../../graphics/images/distributors.jpg
matty h
12-01-11, 11:10 PM
Not sure how to post up a photo but it is the conventional type which is a 8mm hole,no pins etc just a 8mm hole.
take a pic & save it on your pc. then open up a photobucket.com account & upload it, then copy it & paste it on here
matty h
14-01-11, 08:20 PM
going to make my own up now.Buy some ht cable and ends thet way I can make just what I want.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.