Plugs on e16se engine

[Connor]

In process of trying to wire up a e16se into my 1.2 carbed shell
So im wondering whatdo i do with these?
What are these for?
Havent a haynes manual available so thought you lot would know
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1398.snc4/165066_479388859925_637964925_6071640_1349820_n.jp g
1st one has :
Big red (live i'm presuming)
brown and white
green
light blue
red and blue
black
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs029.ash2/34793_479388489925_637964925_6071623_4581536_n.jpg
2nd one:
Red and blue
brown
black
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs822.snc4/68243_479387834925_637964925_6071601_1509540_n.jpg
3rd one:
red
brown
brown and yellow
brown and white

[MattBrown]

Big red is perm live

Black is switched live

Green to tacho on clocks

Red/blue to fuel pump.

[Connor]

Am i better off taking the plugs off and just connecting it to the correct wires? as i dont have the other sides of the plugs available?

[Iain]

Yeah if you don't have the other half of the plug, chop it off and extend them in to the cabin.

[Connor]

Okie dokie
Taa guys

[mowgli]

this looks like the diagnostic one.
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs822.snc4/68243_479387834925_637964925_6071601_1509540_n.jpg

[Mike]

Last pic is definetly a diagnostic plug.

[Connor]

Do i need it?

[Mazz]

Yea, just leave it unconnected, but cover it over so crap doesn't get in the pins

[Connor]

Okay, thats what i was going to do with it, Can you get covers for them?

[Iain]

Here's a universal cover that'll fit:

http://shop.idmsports.com.au/images/First%20Aid%20-%20ELectrical%20Tape.jpg

[Connor]

Where can you buy that from, them covers rare? ;)
but seriously Where abouts are they positioned on a standard e16se car?

[dyl rhino]

On the the bulkhead near the brake fluid res. :)

[Connor]

okay cheers mate
Anyone know what this one is for again?
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs029.ash2/34793_479388489925_637964925_6071623_4581536_n.jpg
with 3 wires out of the back...
Red and blue
brown
black

[AlexW]

That is VSS. Although, Strangely its a Corsa plug?

Edit: That grey plug in the background (Same plug in first pic?) Is corsa, That has a corsa starter/alt etc loom, You dont need any of that on a Nova.

Edit: I may also have the correct bit for that diag plug if I didn't chuck it out.

[MattBrown]

Red and blue is fuel pump and black is switched live?

[AlexW]

Red/blue is also VSS. And its the correct plug, And its in the right place.

[Connor]

yea as said i already found the plug with the fuelpump wire in.
Hence the reason i was confused. And this engine is out of a corsa thats why it has corsa plugs........all starting to make sence now lol

[Iain]

Connor do all those Corsa plugs not remove from the rest of the loom? Seeing as those 1.6 8vs were never originally in a Corsa you shouldn't be fitting any Corsa wiring...

[Connor]

Ermm they may, i will investigate tommorow when i start on it again, then report back, they may of just been added because it was fitted to a corsa? I'm gonna leave them to the side and once its running (if it runs) then i shall remove them afterwards. I have a feeling they have been spliced into the e16se loom somewhere but only time cane tell lol, Over and out.

[AlexW]

Shouldnt be in the e16 loom anywhere, That lot is just Corsa stuff, Oil pressure and stuff, ideally you want to remove it, I wasnt sure if you had already ****ed around with it and keept the corsa wiring. Your Standard Nova wiring replaces all of that.