LET Hoses

[Nova_Tek]

Is there a diagram anywhere that I can refer to when putting back the coolant hoses on the LET.

It's mainly the inlet manifold hoses I recently removed prior to cleaning and painting the inlet manifold. I didn't jot down which went where hence me asking. I took them all apart to be cleaned and checked so I need to know what goes where etc
:thumb:

[Mieran]

I'd be interested to know this as well, I don't think the ones on my car are in the right order

[AlanH]

I have diagrams of what goes where at home, if nobody posts up what you want by the time i get in i'll post them up

[Paul]

Same as XE instead of the return from the rad going to the header tank, it goes to the turbo and from the turbo to the header tank.

Search for XE coolant diagram

[Graeme]

Clicky (http://www.pngclub.com/forum/showthread.php?t=109836)

[Mieran]

On my car I don't have a heater matrix so there is a pipe that goes between these 2 outlets:

http://i51.tinypic.com/e9i4aw.jpg

But on this diagram it different

http://img.photobucket.com/albums/v14/lashednova/20plumbingguide.jpg

What do you do with the side exit on the engine if you don't have a matrix?

[Plug]

if your not using the heater matrix,

The outlet on the side of the head goes to that metal tube that runs around the back of the engine.

and the other pipe on the picalo tube i think its called goes to the expansion tank

[Nova_Tek]

Cheers for tha lads but I need to see which hoses go where on the inlet manifold there loads of little skinny hoses at the bottom part of the inlet which I've forgotton which goes where.

[Plug]

well if you need any help let me know mines still all plumbed up atm

[Paul]

Well thats the coolant setup, you shouldnt have any more hoses other than this!

[Plug]

auxiliriy hoses? i know there is alot of vacum hoses all over the engine

[Paul]

No, he asked for coolant, thats it for coolant.

[Nova_Tek]

Really? SO what are the hoses that connect to the underside of the inlet manifold, they gotta be coolant. I know you've got the fuel hoses and a couple air.

[Plug]

paul is right all the coolant hoses have been explained :)

The rest are for vacum or various sensors

[Paul]

You have which doubles back on itself goes to underside of tb from inlet manifold then thats the one which t-s into rad return