View Full Version : Corsa XE Wiring
Peanut_119
16-12-10, 02:33 PM
I've been doing the C20XE conversion into a corsa and ive become stuck on 3 wires. Theres 2 wires now left in the car on the 9 pin plug. One red and one black, does anybody know exactly where these go to? A picture would be brilliant!!
Thanks in advance :thumb:
Whats the engine loom originally out of
Peanut_119
16-12-10, 02:42 PM
Im unsure tbh, but its a c20xe with lamba sensor and distributor
There are the wires you are inquiring about? In the bay or foot well? Either way the red in a permanent live and the black is an ignition live
Peanut_119
16-12-10, 02:48 PM
In the foot well, thats how ive got it wired up but the engine management light doesnt come on and theres no fuel/spark
MattBrown
16-12-10, 04:42 PM
So there on the engine loom? Or car loom?
Red is perm live to the engine loom
Black is switched live to the engine loom
Red is perm live from the car loom
Black is switched live from the car loom
Maybe try the switched and perm live straight to the battery, see if it starts.
Red run through the bay and straight to battery positive.
Black run through the bay and connect to a small black single plug/wire on the loom near the battery/gearbox area.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.