exhaust q's

[swedge]

right i have a c14se [coilpack] in my nova im using the corsa manifold with the corsa downpipe but had to modify the downpipe to fit as it was at the wrong angle

i have a new exhaust to fit from the downpipe back but would idealy like a replacement downpipe

would any 8v nova downpipe fit to my corsa manifold?

[swedge]

the bottom on my manifold is a 2 bolt fixing same with the end of my new exhaust

so i need a downpipe with 2 bolt fixings on each end and is just a single not a twin pipe

any ideas

[mk1nova_rich]

I thought the C14SE had a twin downpipe?

[swedge]

the c14se im using is from a corsa and has a single downpipe

[mowgli]

http://www.pngclub.com/forum/showthread.php?t=125436&highlight=online+catalogue linky to bosal exhaust catalogue..

surely a nova 1400 or 1600 mpi is the setup to get.

[mk1nova_rich]

You might need to look at 1.4 SPi downpipes then as 1.2 engines have a one piece downpipe and front section, 1.3 SR engines have twin downpipe as do SRi/GTE/GSi

[swedge]

just had a look at that catalogue and there bare no downpipes with a 2 bolt fixing either end with only a single pipe

looks like im gonna have to change the manifold :(

[mk1nova_rich]

Get a 4 branch whacked on mate

[Balley]

Heres mine

http://i818.photobucket.com/albums/zz102/balley77/Corsa%20SRi%20Rep/22012010407.jpg

I used a Nova manifold and welded a lambda thread on :)

[swedge]

Wish my engine was as clean as that lol

did you just weld a nut onto it and where abouts? Did you have to lengthen the lambda wiring?