One wheel rubs!???

[PE4]

I have just fitted some 15" calibra alloys (the flat type ones) with 195/50/15 tyres. The back right tyre rubs when I go over bumps or have a rear passenger!?

It is only the one that does it. I heard a while back that Vauxhall, in the early days, had a tollerance allowance of 4mm over the length of the axles etc (2mm either side)......could this be the case?

Will I have to grind a little bit of the lip away, and will the wheels rub with a lower drop? I was going for -60 all round, should I do a 60/40 instead?

Ta

[mikeoxford]

grind the lip or carefully use a sisor jack to push the arch out a bit, leave for five mins, to let metal take the new shape, and then release

it is because nova beams never seem to sit in the middle of the body

[Ste_Nova]

my 1.2i beam was dead center

16" and 60mm with no mods

[mikeoxford]

my 1.2i beam was dead center

16" and 60mm with no mods

:roll: neither of my two have been

im always unlucky

mike