PDA

View Full Version : Engine Conversion



BubzyWubzy
24-11-10, 01:33 AM
Hi, thinking about getting myself a nova and considering a conversion. What would be the best possible engine to fit as a straight swap? ie no fabrication involved. Cheers :thumb:

Connor
24-11-10, 01:40 AM
Why not buy a nova with the desired engine in it?

BubzyWubzy
24-11-10, 01:44 AM
I would prefer to do it myself, makes for the fun if you know what i mean

Connor
24-11-10, 01:56 AM
What engine size you after?
Plenty different engines slot into these?
What do you intend to use it for? track? road? rally etc etc

BubzyWubzy
24-11-10, 02:13 AM
biggest possible mate, for road use

Connor
24-11-10, 03:00 AM
Well common conversion is the c20xe which has minimal work,
but its hard to say as there are loadsa of different factors.
Personally, the engine i would put in that will be very simple is either the e16se or c16se out of the GTE and GSI models,
there a 1.6 8v engine which produce 100bhp.
My advice is to research a little, and read through different build threads etc, should make your decision alot easier

w_wall_2001
24-11-10, 07:37 PM
as above really, but minimal prep work on car will be the 1.6 8v as no need to seam/stitch the front end and will bolt on standard mounts etc.

shed-on-wheels
24-11-10, 09:38 PM
or a corsa b sport or gsi lump will mount up to any small block gearbox and use stander mounts but the wiring may be a little harder than an 8v :)

mk1nova_rich
24-11-10, 09:39 PM
or a corsa b sport or gsi lump will mount up to any small block gearbox and use stander mounts but the wiring may be a little harder than an 8v :)

The wiring is still a piece of piss, there are plenty of guides on here covering all aspects of the common conversions