sri wireing

[stevie78]

does any one know the colours of the wires that go into the coil on the 14 sri or even some pics if anyone has them .
Also on the sri loom i have it has a rely that looks like the fuelpump relay .but its at the back of the car on the loom:confused:

cheers stevie:thumb:

[phazer]

Is it a coil pack or dizzy version?

The relay, is(was) it clipped to the bulkhead? If so it's the fuel pump relay.

[stevie78]

its the dizzy and the relay is in the rear of the loom as in the boot somewhere

[phazer]

I only have the wiring for the coil pack version, sorry.

Don't recall seeing a relay in the boot on mine - you sure it's factory and not for a boot popper or something?

[stevie78]

up

[stevie78]

must be a relay for the rear wash need a pic of a coil and what wires go where now anybody

[phazer]

wash wipe relay is in the fuse box with all the others ;)

[Pistol Pete]

Wash wipe relay was in the boot on mine (SRi)

I've still got my SRi loom somewhere. I'll dig it out and have a look. Might not be till nearer the weekend though.

[phazer]

Was it? lol I've had mine apart (granted not fully stripped) and never noticed one.

Have to have another look when it's back out in spring.

[Pistol Pete]

lol

When i was doing my XE loom, we connected the battery and could hear this buzzing, clicking sound!! WTF is that we thought. Was the relay!!!

[phazer]

lol every day is a school day :thumb:

[stevie78]

found mine attached to inner arch next to boot light .just need a pic of coil or even the wire colours now folks

[stevie78]

bttt somebody must now what wires go to a sri coil

[C612DNM]

it should be a 4-pin connection yes? thus a Multech management, and should be the same as a Corsa.

Thus :

Pin 1 - Black (Ignition live - 12v with ignition ON)
Pin 2 - Brown (ground - 0v)
Pin 3 - Black with Yellow Trace - to ECU pin C3
Pin 4 - Black with Red Trace - to ECU pin D10

Hope this helps.