View Full Version : Rear Disc Beam Conversion
Steve Barker
31-05-03, 01:57 PM
got a nova rear beam
got a astra 2.0 16v rear beam with discs
how do i put the discs from the rear beam on the astra on to the rear beam on the nova do i just enlarge the holes and use washers ? :?:
Ste_Nova
31-05-03, 03:58 PM
cut the plates off the astra beam.... cut the plates off the nova beam... weld the astra ones....
mikeoxford
31-05-03, 10:36 PM
and if you weld them back on 30 or 60mm higher than they were orginally, bigno! you just got yourself a free -60mm suspension lowering kit!
Ste_Nova
01-06-03, 11:03 AM
you can't go more than 10mm.... there isn't anything to weld to!!
Cjscooby
01-06-03, 04:05 PM
I have been told that you can bolt on the Cav GSi rear discs straight on to where the std nova drums bolt on so means no weldin or hassle but i am only quotin what i have been told so not definate you can
Just thought this might be a better idea if it can be done!
Cj
Ste_Nova
01-06-03, 05:01 PM
no u can't
as ste said........take a look at the inner stub, the bit that bolts on to the beam. they are different shapes.
mikeoxford
01-06-03, 07:15 PM
do i not recall micky just drilling new holes and bolting them on??? regardless of diferent profile holes?
Cjscooby
01-06-03, 07:44 PM
Like i said i was told this by a mate so could be or could not be True!!!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.