comptoncj
18-11-10, 08:28 PM
Been thinking about selling this for a while as i know i have too many other projects to do! So here goes.
Its a rebuilt E16SE its had, 2 second hand pistons fitted, bores honed, piston rings, big end shells, rebuilt oil pump head gasket.
Top end is an E16SE cylinder head with EGR blanked off, Kent AST2 cam with Kent uprated valve springs, new valve stem seals, cam seal etc head has had the ports modified to suit a 1300 inlet manifold. Twin 40 webers are fitted with small ram pipes jetted for a 1600 but havnt been properly set up runs well though.
Its running a 1300 distributor and coil and a mechanical fuel pump,
Engine would benefit from a vernier pulley.
Samco red hose kit, and x16szr cam cover fitted.
This engine has had approx an hours running time since its been rebuilt.
will come with F13 gearbox
Price for Engine complete with carbs, gearbox and hoses £550
Any questions pm me
Cheers
http://i767.photobucket.com/albums/xx311/compton251/P050110_2011_02.jpg
http://i767.photobucket.com/albums/xx311/compton251/P050110_2011_01.jpg
Its a rebuilt E16SE its had, 2 second hand pistons fitted, bores honed, piston rings, big end shells, rebuilt oil pump head gasket.
Top end is an E16SE cylinder head with EGR blanked off, Kent AST2 cam with Kent uprated valve springs, new valve stem seals, cam seal etc head has had the ports modified to suit a 1300 inlet manifold. Twin 40 webers are fitted with small ram pipes jetted for a 1600 but havnt been properly set up runs well though.
Its running a 1300 distributor and coil and a mechanical fuel pump,
Engine would benefit from a vernier pulley.
Samco red hose kit, and x16szr cam cover fitted.
This engine has had approx an hours running time since its been rebuilt.
will come with F13 gearbox
Price for Engine complete with carbs, gearbox and hoses £550
Any questions pm me
Cheers
http://i767.photobucket.com/albums/xx311/compton251/P050110_2011_02.jpg
http://i767.photobucket.com/albums/xx311/compton251/P050110_2011_01.jpg