PDA

View Full Version : fuel guage sender wiring?



Damo
14-11-10, 08:06 PM
Hi,

Right im wanting to know where the earth for the fuel guage sender is as it constantly reads over full but occasionally it works so im thinking it could be the earth as ive already changed the sender unit.

Also is the live wired into the fuse box or straight to the clocks?

Really need this working now as im constantly running the car on dregs and carnt be doing the injectors or engine any good.

Damo.

mowgli
14-11-10, 08:08 PM
it self earths thru the tank

Damo
14-11-10, 08:17 PM
it self earths thru the tank

Even the twist-in type?

So where do the two wires go then that connect to it i know one will go to the guage wheres the other go.

mowgli
14-11-10, 08:27 PM
oh, the mk2 sort.. dunno, i think it goes to earth under the seat somewhere..

Damo
14-11-10, 08:33 PM
oh, the mk2 sort.. dunno, i think it goes to earth under the seat somewhere..

Arh yea sorry forgot to mention its mk2 type:tard: .

Right al have a look its the only thing i can think or that could be wrong.

Knox5126
14-11-10, 09:14 PM
check your wires from the sender into the car (under the seat) i had the same prob and it was bare wires touching causing the same problem

Damo
14-11-10, 09:38 PM
check your wires from the sender into the car (under the seat) i had the same prob and it was bare wires touching causing the same problem

Ill try that mate cheers.

mk1nova_rich
15-11-10, 04:43 AM
the live is straight to clocks and the earth goes back along the loom and earths on the rear panel below the boot catch IIRC

Edd
15-11-10, 10:44 AM
if its reading full all the time it could be the sender itself