PDA

View Full Version : runing lumpy on tick over


vauxluva
11-11-10, 01:53 PM
I have just rebuilt the top end and timed her via no.1 piston to be top dead but it seems to be out of time.But:confused: if you give it some on the pedal it revs fine?
mowgli
11-11-10, 01:58 PM
what engine?
Damo
11-11-10, 02:00 PM
What engine is it mate? Are the Ht leads on the right plugs?
vauxluva
11-11-10, 02:01 PM
Its 1.4 nv, yes they are on correct it revs fine when you give her the beans?
mowgli
11-11-10, 02:15 PM
don't they have timing marks on the cambelt pulleys?
vauxluva
11-11-10, 02:17 PM
yes on the top and bottom pulleys but there is no pin to line up the bottom one? it states this in the haynes ?
mowgli
11-11-10, 02:19 PM
the timing mark is on the alt pulley, isn't it?
vauxluva
11-11-10, 02:21 PM
yes and in the haynes it sates to line it up with a pin on the bottom end i have two 1.4 sr bottom ends and they do not have them yet my mates 1300 (sr) grass tracker has?
mowgli
11-11-10, 02:36 PM
have you moved the dizzy timing?
Damo
11-11-10, 03:07 PM
If you take the outer crank pulley off there should be an arrow on the toothed cog and a cutout on the oil pump the toothed crankshaft cog should point down at 6 and the camshaft should point up at 12.

Dont trust the outer pulley there never right ive found.

Damo.
vauxluva
11-11-10, 03:58 PM
Cheers ill try that!
Damo
11-11-10, 06:53 PM
Did you manage to sort it mate?