PDA

View Full Version : Carbon fibre matrix blank & other CF bits


Mike
07-11-10, 02:46 PM
Carbon fibre matrix hole blank/cover

Single ply, completely carbon (not overlaid FG or plastic sheet like eBay tat) one of only 2, other one is fitted to Matts (Hobbit) track car.

£Sold.

--------------------------------------------------------------------------------------

Carbon fibre offcut, this is overlaid FG tissue alot stronger then a single ply peice. Approx 1x130x210.

£Sold.

--------------------------------------------------------------------------------------

Carbon fibre offcuts x2, again overlaid FG tissue alot stronger then a single ply peice. 1x190x150

£9.79 each delivered.
----------------------------------------------

Carbon fibre offcut, again this is overlaid FG tissue so its alot stronger then a single ply peice. Approx 1x260x360.

http://i80.photobucket.com/albums/j181/mikenova/Random/100_1565.jpg

£Sold.

Also have quite a lot of other smaller single ply offcuts ranging from 100x100 upto about 150x200ish sizes. Couple of Corsa B dashblanks for minimal dash installs (track/race/rally minimalistic dash setups) and a couple of Nova fuel sender blanks somewhere.

Just to inform you all in the new year I should be finally able to branch out into making bodypanels & skins, kevlar guards, wrapped items etc etc.
Bubba
07-11-10, 03:09 PM
does this cover the hole where the heater blower was in the bulkhead?
Mike
07-11-10, 03:14 PM
does this cover the hole where the heater blower was in the bulkhead?

Sure does :)
Bubba
07-11-10, 03:16 PM
paypal me :)
Mike
07-11-10, 03:22 PM
paypal me :)

YHPM.
Mike
08-11-10, 11:42 AM
Alyup
dan23
08-11-10, 10:28 PM
i d like some in these sizes if poss

550mm x220mm
320mmx160
230mx250mm
230mmx 220mm

i know there not listed but on the off chance you have them let me know
Mike
11-11-10, 05:46 PM
Up.

Can do them Dan, but not until about 2 weeks away at a minimum!
Mike
13-11-10, 12:50 PM
up
Mike
14-11-10, 04:25 PM
up
Mike
16-11-10, 04:49 PM
Now have this one remianing peice aswell as several other large peices up on eBay amongst other things.
Mike
19-11-10, 02:27 PM
Up. Coming to the end of a 10m roll now & wont be ordering anymore till the new year.
Mike
20-11-10, 04:31 PM
Couple more now added.

Will also have carbon kevlar towards christmas/new year.
Mike
04-12-10, 10:26 AM
Just the two small pieces remianing now.