Steering/tracking problem

[auzzy-b]

Set my tracking and all was well! Then I've noticed when I steer right (hard) eg: going around a roundabout.. the car will then pull right, same thing happens when I steer left (hard) what the fook?

[andy_mk3]

So when you steer right it pulls to the right, and you steer left and it pulls to the left? Am I missing something here lol ?

[auzzy-b]

lol it pulls to the left or right when going in a straight line. Tracking!

[mowgli]

so somebody has set it toe out........ and when you turn the wheel, it grabs.

[auzzy-b]

So it wants to be slightly in?
I set it myself using laser equipment and they were bang on parallel, not in or out.. To my eyes anyway lol

[bazil]

You need the proper settings, I can post them up later, it gives cast camber and toe angles

[mowgli]

the lower suspension bushes could be badly worn.. so the settings move about a bit when driving.

[Damo]

Tracking should be set at +1.0 auzzy but allow for the mods like wheels suspension as it changes the manufacturers settings if you know what i mean ive had mine set at +1.0 with my XE and its fine no pulling or owt.

[bazil]

this is what is says in me thatcham manual,

http://i790.photobucket.com/albums/yy181/Bazil_2468/me%20novas/PA270017.jpg

[AlexW]

Wonder why they changed the camber angle after 88?

[auzzy-b]

the lower suspension bushes could be badly worn.. so the settings move about a bit when driving.
Suspension is brand new, so are the lower arms, track rod ends etc?

[Maxfield]

Rack bushes?

[auzzy-b]

Thanks for help guys! I'll have another go at it this weekend:)