PDA

View Full Version : how much power can you get out of a c20ser


torquey
21-10-10, 05:45 PM
as above got a filter full stainless xe injectors afr what else can i do to it. dont say xe it!lol
Sloth
21-10-10, 05:47 PM
bodies or nos
JensonLEI
21-10-10, 05:48 PM
xe it.....
mowgli
21-10-10, 05:49 PM
if you mean an seh, then if it was in good fettle, about 135hp at the moment, you could do the head, & cam, or turbo it.
Danny s-p
21-10-10, 05:53 PM
what is one a 8 valve
torquey
21-10-10, 05:55 PM
no its a ser out of an astra gte what cam would be best?
Andy
21-10-10, 05:58 PM
you mean an se
torquey
21-10-10, 05:59 PM
i was just going of engine number on block:thumb:
mowgli
21-10-10, 06:02 PM
i was thinking SEH.

with a cam & head, it would be into xe territory but trying to get much more will be costly. not many people do tuning stuff for the old 8V, compared to XE stuff
torquey
21-10-10, 06:04 PM
gonna look at cams and get head ported and polished cheers:thumb:
Sloth
21-10-10, 06:05 PM
ser is an seh without the cam.
Will F
22-10-10, 08:29 AM
ser is an seh without the cam.

Actually the pistons and ECU are different too

And there isnt such a thing as an SER??

There are 2 versions of the 2L 8v - the SEH - 130 bhp and the NE - 115 bhp
Sloth
22-10-10, 09:30 AM
nope the ser is basically a detuned seh, according to epc, its the cam thats a std ne grind. the ser i s found in some astra mk2 gte 8v's
Sloth
22-10-10, 09:32 AM
oh and these are 2.0 8v ohc codes:
20ne
c20ne
20seh
20ser
20se
c20se
x20se
c20get
c20sel
c20ge - daewoo code, good for a turbo....

a lad on mig used a x20xev bottom end with an seh cam and head and ecu etc. made 157bhp on the rollers. needed 99 octane or it pinked like fook....