For Sale: XE Headset

[Paul]

Complete headset for sale as found in garage:

All Genuine used parts:

1x Headgasket
1x Cambelt
10x Headbolts
1x Timing Belt
1x Inlet Gasket
1x Exhaust Gasket

http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs387.ash2/66520_443857612399_637782399_5720974_114772_n.jpg

Can also include tube of silicon sealer for asking price

£30 + P&P

[Alex J]

Bargain, can vouch for this as it came off of my car

[Adam]

Open to offers?

[Alex J]

will swap for a new full headgasket set!!

[Alex J]

cam belt can be glued together, and put some silicone round the headgasket ang tighten an extra 5 degreeslol , good as new, any takers???

[Rich]

how many miles has it done? very interested if you can wait till end of 2011 when i get paid?

[gazz]

how many miles has it all done? :d

[Alex J]

i think mowgli wants first dibs on this!!

[MattBrown]

Pics? 1st Dibbs, Ill defo Have it, is it mint?

lol

[Pistol Pete]

:confused:

[Alex J]

Roll up roll up, 16 genuine Valve Stem Oil Seals added, also single replacement piston:

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs027.snc4/33724_446457012399_637782399_5764133_8207793_n.jpg

Im lead to beleive some chemical metal will make this 'as new'

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs951.snc4/74397_446457477399_637782399_5764138_6111344_n.jpg

Some silicon round the valve stem oil seals should stop them leaking...

[Stuart]

got any used silicone for the cam cover?

[Ernie]

I was really after a bucket of compressed air if you have any up the yard..

[pie]

i need sparks for my grinder?

[Bubba]

i need some gas flowed pistons and some revesable valves

[wwmnw]

I need a solution to my cam lag :(

[Bubba]

I need a solution to my cam lag :(

tighten your exhaust rubbers, this will stop excess engine rocking causing such lag

[Spudly]

http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs387.ash2/66520_443857612399_637782399_5720974_114772_n.jpg






Lol silly maris removed the cambelt packaging with an axe didnt he lol

[Alex J]

all above parts have NOT been axed and are in full non working order, i can also chuck in a used oil filter and old oil if need be, also up or grabs is a snapped clutch cable, all parts come with a tube of silcone, and as im told, tighten the bolts a further 5 degrees, and there be good as new, form an orderly que please, as theres alot of demand on this lot!!!!

[Graeme]

If anyone is buyin the above parts i have some second hand late type tensioners and water pump, all non genuine and in similar condition to the above parts

[pie]

have you got any used petrol ????

[mowgli]

i need some gas flowed pistons and some revesable valves

you should talk to this lad......eBay. Item number: 290491925721

in his own words [

Engine is a 1.2 merit on log book, was told by previous owner that head has been skimmed and gas flowed to a 1.3
]

[Danny s-p]

you should talk to this lad......eBay. Item number: 290491925721

in his own words [

Engine is a 1.2 merit on log book, was told by previous owner that head has been skimmed and gas flowed to a 1.3
]i was going to take the p**s out him but all stop my self :d

[John]

paul, do you still have the double overhead manifold sprockets?

[mowgli]

do you have a 710 cap??

[L14MNP]

do you have a 710 cap??

Don't be a n00b Mr Mowgli. Every inept motorist knows the 710 liquid is filled via the dipstick.

[mowgli]

oh, yes, fill it till it comes out the top, right???

[Danny s-p]

do you have a 710 cap??
£50
http://i737.photobucket.com/albums/xx20/dannys-p08/710.jpg

[L14MNP]

I worked with a guy who done that to his Oriscort once. Albeit via the actual cap. He 'topped up' the oil in the company carpark and it then 'stopped working' when he tried to leave. So we investigated, it seems the good old tappet monster didn't appreciate being filled to the brim of the cam cover with about 15 litres of oil lol.

The empty bottles in the boot were classic.

Things like that can get you through a long shift with ease. lol

[mowgli]

would you have any spare cans of overspray?? i need some for my wheelarches

[nova_saloon]

Bargain!

[Sloth]

lol at tappet monster.....


i have a butchered xe loom and a fooked coil and dodgy plugs here.

at this rate we will have a full xe lads, good for 180bhp....

[mayhem]

i might have a spare bag of sparks laying around..

also for sale:

a c20xe bottem end, has an cold air intake in the middle of cilinder 3. ideal for boost projects.

[Alex J]

i might have a spare bag of sparks laying around..

also for sale:

a c20xe bottem end, has an cold air intake in the middle of cilinder 3. ideal for boost projects.just silicone the missing bits back in! just had a tidy up in the garage and have found.. a long wait, bag of spot welds ,a bag of sky hooks, and selection of left handed screw drivers, and a tin of tarten paint, all offers welcome!!

[L14MNP]

just had a tidy up in the garage and have found.a bag of sky hooks, and selection of left handed screw drivers,all offers welcome!!

50p each on the Sky Hooks mate? They're only a quid new (http://www.skyhook-gb.com/pricing.htm)

Interested in the screwdrivers too, as shipping will be a pig on this one (http://kalecoauto.com/index.php?main_page=product_info&cPath=5&products_id=21)

lol

[Ernie]

im looking for a G string for my air guitar

[ianb90]

2 belts and 4 pistons please?

[Ben]

This from the white gsi you just bough maris?

[mowgli]

is the screwdriver for lefthanded thread screws, or for left handed people?

[Alex J]

This from the white gsi you just bough maris?yes sir, apart from the piston, that was fron a really good rs focus that went BANG!!, rest is from the gsi, valve steams were a bit smokey, so took the head of, brought a new full head set and cam belt kit (not a slap dash silcone job) and 16 valve steams, and bloody hell that is a long boring job to fitlol !!

[tony k]

got a genuine gm chassie gasket to anyone wants it

[mowgli]

got a genuine gm chassie gasket to anyone wants it

pics please

[Alex J]

dibs anyone??

[mayhem]

i've found a 2,5 inch left flowing downpipe, with a 2,5 inch right flowing exhaust for a c20let.