PDA

View Full Version : 1.3 block complete with crank and pistons


jonnyp
12-10-10, 06:04 PM
come guys someone out there must have one kicking around their garage floor???????
SR-Rally
12-10-10, 08:29 PM
I have crank pistons and flywheel lol but no block
jonnyp
12-10-10, 08:32 PM
lol gutted mate could have been a perfect transaction with the head im buyin off ya lol
John
12-10-10, 08:33 PM
one in the f/s section iirc.
SR-Rally
12-10-10, 08:37 PM
I know :) I do actually have a 1400 bottom end. Been sat in loft for few months so not sure on condition. Let me know if you want me to check :)
Novasport
12-10-10, 08:39 PM
I have a 1300 bottom end but no internals. It has a fresh .5 overbore and has been oiled to keep it good.
Its Roystons actually so all funds would go to him.
Its in Derby, East mids
SR-Rally
12-10-10, 08:43 PM
I have crank, flywheel and standard pistons or 12st pistons which means it needs 2.7mm overbore iirc their what I use in rally car. :s but no conrods lol and I have inlet and carb. And exhaust manifold and downpipe. And cam housing cam and cover. Slowly getting there lol
jonnyp
12-10-10, 08:44 PM
unfortunatley its gotta be a 13 an not a 14 as its going in a class 2 autograss car
jonnyp
12-10-10, 08:45 PM
how much 4 the bare block novasport
jonnyp
12-10-10, 08:46 PM
one in the f/s section iirc.
ive not seen that mate who has that ?
John
12-10-10, 08:48 PM
ive not seen that mate who has that ?

http://www.pngclub.com/forum/showthread.php?t=156716

:thumb:
jonnyp
12-10-10, 09:32 PM
:thumb:
Novasport
12-10-10, 09:50 PM
how much 4 the bare block novasport

Will confirm with Royston but probably about £40 collected.
stevie78
13-10-10, 06:15 AM
got one lying in my garage pistons are seized with sitting so long tho 20 quid