View Full Version : ball joint on my gear linkage keeps popping off..
bigdan1
03-10-10, 12:15 PM
as above its really annoying me now comes off every few hundred feet!
is there a split pin supposed to be there to keep it in place?
or is it just ****ed and i need a new one?
thanks guys
MattBrown
03-10-10, 12:18 PM
The little white plastic joint?
32p from vaux.
But nls!
bigdan1
03-10-10, 12:25 PM
sorry i should be more clear...
its under the car sits right by the rack, its where the linkage from the gearbox joins the linkage from the gear stick has a little box which the ball joint pops into
You need a replacement unfortunately. Try to get a whole linkage with the balljoint attached as every time they are separated the joint weakens.
if you mean the rod with 2 sockets on, just get a corsa b one from the dealer
bigdan1
03-10-10, 08:34 PM
thanks guys, ill go tomorrow :thumb:
Mine used to do this and I'd loose reverse and fifth, there is no way of seperating the ball joints due to them being old and brittle, I say build a rj one as featured to the articles section
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.