Stupid question maybe, but I need to know

[Royston]

Were all nova's wheel studs 19mm heads during production or did they change later to 17mm heads like the later Vauxhalls?:confused:



Mine are both now on 17mm studs and I'd like to get sone genuine Vuaxhall wheel braces for the boot kit, sad I knowlol

[Graeme]

Iirc all the ones I have had have been 17mm

[vaughanmc]

AFAIK they were all 17mm...

[Royston]

AFAIK they were all 17mm...

No actually all the early ones are 19mm;) upto @ C reg, maybe later I don't know when they changed.

Not ever owning a later one I didn't know, but thank you for letting me know:thumb:



Anyone got some spare 17mm Nova/astra wheel braces spare:)

[John]

yep all early ones were 19mm.

[craig green]

All mine have been 17mm.

[Paul]

i always thought vaux have always used 17s

[John]

I have an a reg car and a c reg car here, both with 19mm bolts, My b reg gl also had 19mm wheel bolts.

[John]

i always thought vaux have always used 17s

Mk1 astra, mk2 cav and early novas all used them iirc.

[Paul]

ive said this a lot recently, but u learn something new everyday!

[Southie]

Just to throw a spanner in the works (deflected by Maris lol) my D reg has 19mm.

[General Baxter]

my 5 door had 19 and 17mm

pissed me off keep changing sockets, in the end i swaped them all to the same lol

[Royston]

I have an a reg car and a c reg car here, both with 19mm bolts, My b reg gl also had 19mm wheel bolts.

Just checked the D reg saloon it appears to be 19mmlol

I'm getting a real anoraklol

[mk1nova_rich]

my E reg had 19mm bolts but only had two on each wheel lol so swapped for 17mm bolts off a K reg

[Andy]

my d reg antibes and b reg swing have 19mm
My f reg sr had 17mm.I reckon around 88/89 was changeover

[Damo]

Yea as people have said all the early ones had 19mm nuts from factory.

[Jack]

My saloon has a mix of 17 and 19 lol

[mayhem]

lol

somewhere around 86 they changed to 17. before is all 19.