View Full Version : shaving engine bay problem
novadose2009
28-09-10, 10:45 AM
hi im currently smoothing and shaving my engine bay and need 2 re-locate my wiper motor so i can cut out the bulkhead has any1 re-located theres before or used a different 1 were i can move it right under the scuttle out of the way.
thanks 4 any help
Single wiper from a Citroen, have a search there was something in Articles about it. Also Prey's WIP as he did it recently.
citoen zx ianelelelelel. there is a nice guide in how to's. enjoy :)
novadose2009
28-09-10, 11:29 AM
ok thanks i dint want 2 use a single wiper convertion but if theres not a better solution then i shall do that
This page will show you the way to remove the firewall without grinding it to bits, also shows where all the welds are that hold it in place.
http://www.pngclub.com/forum/showthread.php?t=153919&page=2
novadose2009
28-09-10, 11:45 AM
thankyou deffinatly goin 2 be doing this now shaved/smoothed brown 2door loon FTW
bin the text typing or you go on a 1 month holiday...
novadose2009
28-09-10, 11:59 AM
was it that i sed goin or 2 or ftw?
was it that i sed goin or 2 or ftw?
bold FTL!
acronyms = ok
text typing (ie being a lazy fool) = fail.
Read the PNG rules (that you agreed to when you signed up) ;)
MARTIN KELSON
28-09-10, 09:29 PM
I used a Fiat Uno.
Just make it out in picture below.
http://i12.photobucket.com/albums/a220/NOVAMARTIN16V/DSC03669.jpg
novadose2009
28-09-10, 10:43 PM
is the uno a single wiper buddy or duel? id rather keep the 2 if i can
MARTIN KELSON
28-09-10, 10:58 PM
is the uno a single wiper buddy or duel? id rather keep the 2 if i can
Single
Sorry mate!
Just fit two motors.....?
novadose2009
28-09-10, 11:07 PM
could u do that? use 2 single wipers 2 make a normal duel wiper?
16v Nova Kev
28-09-10, 11:10 PM
aye but they would end up out of sync. it would be funny to see tho.
novadose2009
28-09-10, 11:12 PM
does anyone no if i can still have duel wipers witout having 2 mount the motor 2 the bulkhead?
if not the citroen zx single wiper seems 2 be the best idea
16v Nova Kev
28-09-10, 11:14 PM
why dont you just cut some of the bulkhead away and keep the part the wiper motor bolts onto.
novadose2009
28-09-10, 11:16 PM
wanna take it all out and i no the zx wiper bolts 2 the scuttle so itl be out of the way
Utter final warning about the text typing...
fearless
29-09-10, 07:11 PM
Cant find the picture to show how but you can keep the original wiper linkage but move the motor to inside the car (Behind where the glove box is) with the crank arm of the motor protuding into the engine bay underneath the skuttle trim - then all you see is the 3 bolts holding the motor and the crank arm - simples
Just done a quick sketch on paint circled in red
http://img.photobucket.com/albums/v516/fearlessmotorsport/wiper.jpg
Dave
novadose2009
30-09-10, 10:48 AM
ok thanks every one got alot to think about now and still not desided citroen zx would be easiest but i think il relocate the nova motor behind the dash as shown by fearless
thanks guys
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.