View Full Version : Parts for my c20xe conversion
Right I am in the process of fitting my xe and still need a few parts to complete it so will be adding to this list as and when I remember them.
So first things
A radiatior to suit a XE as I dont think my 1L one will copelol (sorted)
Lower front panel with crossmember to suit 84 model(dont know if theres a difference)
Single V bottom pully(sorted)
Gte/gsi brake servo
What have you got and prices posted to me unless fairly local and I will colllect.
Cheers
Edited list 01/10
think you can still get the lower front panel with crossmember new from aftermarket suppliers
think you can still get the lower front panel with crossmember new from aftermarket suppliers
Any ideas which ones?
I emailed hadrian but they had none in:roll:
Cheers
i use a place in paisley (Glasgow), its called autoscot, not sure of the number but they are on Abercorn street, paisley
hope that helps buddy
cheers mate just found a number for a loacl place if they have no joy will try autoscot. Lets hope they do mail order lol
a would think the do mate. good luck anyway
plenty of pulleys on ebay mate, as for a rad, you can use a 1.2,1.3,1.4 or 1.6 nova one, or i have fitted a corsa 1.2 one with a wee bit of trimming of the lugs.
plenty of pulleys on ebay mate, as for a rad, you can use a 1.2,1.3,1.4 or 1.6 nova one, or i have fitted a corsa 1.2 one with a wee bit of trimming of the lugs.is the 1.2 rad big enough to run a c20xe?
is the 1.2 rad big enough to run a c20xe?
Yea dc im running a corsa 1.2 rad on mine with no cooling issues mate.
I know ebay links are not allowed but not trying to promote any thing just wondering if this is the rad I use as it semmes a good price fr a new unit?
http://cgi.ebay.co.uk/VAUXHALL-NOVA-1-2-1-3-1-4i-1-6i-RADIATOR-NEW-74509-/400110589425?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item5d287315f1
Thanks for the advice
I have a turned down factory pulley (single V), rear gearbox spacer and arb lowering blocks here if they are any use
I have a turned down factory pulley (single V), rear gearbox spacer and arb lowering blocks here if they are any use
Just had an offer of a trimmed down pully. so any pics of yours and a price posted please mate?
Also not sure if I have the rear gearbox spacer I just bought most bits off some fella who was breaking one. I will have to get pics up of what I have but if I dont have it I will be intrested.
As for arb blocks car has never had a arb so think im going to stick with out one:thumb:
if thats a gte one, yeah its damn cheap
Right rad is sorted as should be the single V pully.
Still looking for a lower front panel with crossmember and also now looking for a gte/gsi brake servo. All parts needed asap so what have you got?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.