josh-sri
25-09-10, 04:43 PM
Hi all, ive decided to sell my turbo kit as im going to change to a c20xe engine. I bought most of this kit off a lad who advertised it on here a while back. I then bought the rest of the parts needed and fitted it to my 1.4 sri 8v engine. I had the kit on ebay the other week but then had a change of mind:roll: . Now ive decided to get the 2.0 conversion done. I ran this at 10psi on standard internals and its still running great now. Manifold,downpipe was made by a fabricator and is a work of art. Right, the kit includes the following:
Custom tubular manifold with external wastegate runner
Custom downpipe
External wastegate
2x tdo4l turbos, one modified to use the external wastegate the other standard. ( small amount of play in shaft but ive never seen this as a problem as it works fine)
Dump Valve
Manual boost controller
Boost Guage
C20xe injectors and e16se fuel rail
All the boost pipework needed to fit it
vacuum lines etc
Sandwich plate and oil lines
Coolant lines were made up myself and aren't exactly great but they do the job!
Im sure ive missed things but basically everything is there to turbo a smallblock 8v engine. No need to move oil filter or rad etc, its a tight squeeze when its fitted but it does all get in there lol.
Im wanting £500 for this wich IMO is a bargain. It took me ages to find the daft bits like oil lines etc and now all the hard work is done. Kit is located in Bridlington east yorkshire. I havnt got any pictures on my computer atm but i'll get some up asap! Can text pictures also if serious. Texts are probably better to contact me as i cant answer at work 07949256763.
Thanks alot
josh
Custom tubular manifold with external wastegate runner
Custom downpipe
External wastegate
2x tdo4l turbos, one modified to use the external wastegate the other standard. ( small amount of play in shaft but ive never seen this as a problem as it works fine)
Dump Valve
Manual boost controller
Boost Guage
C20xe injectors and e16se fuel rail
All the boost pipework needed to fit it
vacuum lines etc
Sandwich plate and oil lines
Coolant lines were made up myself and aren't exactly great but they do the job!
Im sure ive missed things but basically everything is there to turbo a smallblock 8v engine. No need to move oil filter or rad etc, its a tight squeeze when its fitted but it does all get in there lol.
Im wanting £500 for this wich IMO is a bargain. It took me ages to find the daft bits like oil lines etc and now all the hard work is done. Kit is located in Bridlington east yorkshire. I havnt got any pictures on my computer atm but i'll get some up asap! Can text pictures also if serious. Texts are probably better to contact me as i cant answer at work 07949256763.
Thanks alot
josh