PDA

View Full Version : strengthening plates


Fow16v
23-09-10, 09:41 PM
anyone know where i can get hold of a set from?

cheers
Ryan
craig green
23-09-10, 09:46 PM
I have the rear beam ones here if they are any use?
mowgli
23-09-10, 09:53 PM
google 'harry hockley' & ask for the fast road ones.. they are cheaper
Nova_Tek
23-09-10, 09:53 PM
Harry Hockley - www.hh-ms.com
Fow16v
24-09-10, 09:32 PM
cheers :)

craig how much for the rear beam ones?
Mike
24-09-10, 09:34 PM
Ive got the remains of a HH set here, odd one or two plates missing though but cant remember which ones like.
Fow16v
24-09-10, 09:38 PM
is the fast road kit suitable for going big block?

it shows both kits in the link what plates are with each kit? i can see the fast road includes tie bar mounts, strut top and ????

what about rally kit?

http://www.hh-ms.com/database/index.php?SelCategoryID=5&SelModelID=14&SelSubCategoryID=4
Fow16v
24-09-10, 09:39 PM
Ive got the remains of a HH set here, odd one or two plates missing though but cant remember which ones like.

could you have a look see whats there for me and how much you after for it?
Mike
24-09-10, 09:42 PM
could you have a look see whats there for me and how much you after for it?

5 mins, its out in the workshop. Brew an fag an mince around workshop in the dark time lol lol
craig green
24-09-10, 09:45 PM
Fow. You can have the rears for £12 posted.

the rally kit has the lower sump guard mounts which weld into the chassis leg under the floor (with the captive nuts in), full set of little discs to plug all the hiles in the floor & 1 or 2 extra plates iirc.

The road kit has only come about over the last year or so I think.

I had the full rally kit back in 2002 from HH. Thats where the beam plates are left over from as I never got around to putting them on. Pretty sure the above mentioned sump gaurd mounts are there too.

CG
Fow16v
24-09-10, 09:50 PM
ok craig cheers, the rally kit seems a bit ott for what i need then. ill take the rears paypal ok pm me details and ill sort you out

Ryan
Mike
24-09-10, 09:52 PM
Yea thats the kit I had Craig with the floor pan cirlces like.

Fow, mine is missing the 2 big plates in the middle of pic, both of top left (sump guard mounts) 1 of middle left, 1 of bottom right. Ive also got the rear beam plates.

http://www.pro-tecmotorsport.com/partsDetails.cfm?id=1