R1 Carbs, Bogg Bros inlet manifold, 18E engine 120bhp

[Maka]

For sale I have a set of R1 carbs, mains rejetted to 1.9mm and tuned accordingly to run on a C20SEH. Was never rolling roaded so exact power unknown but ran and went extremely well, not far behind my mates redtop mk2 nova and ran a 16.2sec 1/4mile at PVS earlier this year.

Im looking for offers around £100 for the carbs

http://i130.photobucket.com/albums/p252/maka_dturbo/r1carbsc20seh.jpg


Also for sale the Bogg Bros manifold used to fit the carbs to the C20SEH, will also fit the C20NE but WILL NOT fit 1800cc engines due to varying port-height patterns between the two. Paid £125 for this off HayLewis68 off here not long ago. New from Bogg Bros these manifolds are around £200
Looking for £100 posted for this.

http://i130.photobucket.com/albums/p252/maka_dturbo/inlet.jpg

http://i130.photobucket.com/albums/p252/maka_dturbo/inlet2.jpg

http://i130.photobucket.com/albums/p252/maka_dturbo/inlet1.jpg

Also for sale, hall sensor distributor to run carbs using original nova coil. This distributor was purchased from H&H ignition last year for well over £100 and has only covered a few thousand miles, receipt from H&H will be provided with sale along with loom. £80

http://i130.photobucket.com/albums/p252/maka_dturbo/r1carbsc20seh.jpg

STILL for sale my nova's old engine.
Mk1 astra gte 18E
Rolling roaded in Feb at 119.4bhp with 111.2lb/ft.
Great engine for a nova, unknown mileage as it came in my nova already fitted when I bought it.
It's run 45k faultless miles for me and seems to be a bombproof engine.
Regular oil and filter changes carried out every 10k whilst owned by me.
Comes complete with:-
Full wiring loom inc. ECU with full loom to meet the dizzy setup and coil Ported and polished throttle body, only bought two weeks before the nova was stripped at a cost of £125. Rolling road printout shown was without the uprated throttle body fitted.
Very torquey engine, reluctant sale but Im now running a C20SEH on bike carbs.
Only thing required to get this engine running is a distributor as I've used this for my bike carb conversion.
Pics -
http://i130.photobucket.com/albums/p252/maka_dturbo/Photo0549-2.jpg

http://i130.photobucket.com/albums/p252/maka_dturbo/Photo0551-1.jpg

http://i130.photobucket.com/albums/p252/maka_dturbo/Photo0552-1.jpg

http://i130.photobucket.com/albums/p252/maka_dturbo/Photo0550-1.jpg

http://i130.photobucket.com/albums/p252/maka_dturbo/Photo0553-1.jpg

http://i130.photobucket.com/albums/p252/maka_dturbo/Photo0554-1.jpg

http://i130.photobucket.com/albums/p252/maka_dturbo/Photo0518.jpg

For the full engine with the uprated throttle body and loom im looking for £150!
Deals can be struck for a cheaper price minus the throttle body.
PM me for more details but I'll check back here regularly too.
Cheers, Maka

[belmonty_daryl]

is this still for sale? cheers

[Connor]

seeing as the advert is less than 6 hours old, i would of thought so.
sorry to spam

[matty h]

PM sent.

[belmonty_daryl]

seeing as the advert is less than 6 hours old, i would of thought so.
sorry to spam

thought it was his old thread as he had it for sale on here a few months back, didnt realise this was a new one.
pm'd mate

[Maka]

Carbs, distributor and engine provisionally sold :thumb: