View Full Version : connect C/L to Alarm.
burgessovsalford
21-05-03, 03:46 PM
Ive got an alarm atm with a C/L output, & was wondering if I can connect that to my C/L(GM type) so to get remote C/L.
Can I do this, if so what wires am I connectinf my alarm outputs to on the interface?
Ste_Nova
21-05-03, 04:18 PM
swap the drivers side switch for a switch/motor affair from the boot of a carlton, cav?
this will give u the 2 wired needed for the alarm to fit to... aswell as keeping it simple and solid sounding
mikeoxford
21-05-03, 11:29 PM
ill try and dig out my diagram that someone did me on my old car and ill scan it in.......
mike
burgessovsalford
22-05-03, 09:29 AM
Sounds pretty simple anyway, but cheers mike... :wink:
mikeoxford
23-05-03, 11:10 PM
Sounds pretty simple anyway, but cheers mike... :wink:
ah........
but do you know wich wire on the GM control box is the trigger wire to lock and unlock!? :lol: :wink:
Ste_Nova
24-05-03, 08:21 PM
red/brown
white/brown
burgessovsalford
27-05-03, 12:12 PM
Sounds pretty simple anyway, but cheers mike... :wink:
ah........
but do you know wich wire on the GM control box is the trigger wire to lock and unlock!? :lol: :wink:
I do now! :D
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.