View Full Version : nova red top gear linkage?
longjohn
19-09-10, 05:16 PM
please can anyone help as i'm close to finishing my nova 2ltr conversion but i can't get all the gears?
I can get R,1,3,5 but not 2nd and 4th.
the selector keeps hitting agains the stearing rack when trying to get 2+4.
Do i need to turn anything around or extend bits?
craig green
19-09-10, 05:21 PM
the white nylon part in the uj. reverse it.
longjohn
19-09-10, 06:07 PM
will try it thanks
Pistol Pete
19-09-10, 06:50 PM
Do what Craig says, i forgot this when doing mine. Also double check that your gear stick is central when doing the clamp up to the linkage bar.
Do what Craig says, i forgot this when doing mine. Also double check that your gear stick is central when doing the clamp up to the linkage bar.
Just set the gear linkage the correct way.
Pistol Pete
19-09-10, 07:01 PM
Which is?
Remove plunger from gear selector housing, twist linkage to enable 5mm drill bit to fit into the hole you've removed the plunger from. Slacken 13mm bolt on linkage, pull up gear gaiter and hold the 2 arrows together and re-tigthen linkage, remove drill bit and fit plunger.
novaxe235
19-09-10, 07:28 PM
No it's a 4mm.
Pistol Pete
15-10-10, 05:11 PM
Remove plunger from gear selector housing, twist linkage to enable 5mm drill bit to fit into the hole you've removed the plunger from. Slacken 13mm bolt on linkage, pull up gear gaiter and hold the 2 arrows together and re-tigthen linkage, remove drill bit and fit plunger.
lol noob alert and thread hi-jack!!!! John any pics of the above? (or anyone else?) Reason being is i cant get reverse and think my linkage is the reason. Also might be handy in the articles section.
Pistol Pete
15-10-10, 05:19 PM
Sweet. Will have a gander tomorrow. Nova Haynes??
Edit: Cavalier Haynes as its the F20??!!
cav haynes for the box, nova for the stick. if pb worked id scan it up
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.