View Full Version : 4-1 ashley manifold
crazynovagsi
19-09-10, 02:31 PM
Hi going to be fitting in my 4-1 manifold in soon and was wondering on the 1.4 sri originaly it has a lambda sensor in the manifold. Would i need 2 drill n make a hole for the lambda sensor to go into the 4-1 or can i leave it unplugged?
thanks
Yeah you will need it.
Best putting it down in the collector, by the sump.
But because its so far away from the cylinder head you will need a heated sensor.
crazynovagsi
19-09-10, 02:49 PM
what difference does it make? also i got a straight pipe with no cat.
stupot89
19-09-10, 05:54 PM
when i got mine in the donar sri it had 4 branch on it but no lambda and the EML remved still runs ok though
Pistol Pete
19-09-10, 06:52 PM
Yeah you will need it.
Best putting it down in the collector, by the sump.
But because its so far away from the cylinder head you will need a heated sensor.
Exactly what i did for mine. Bought a weld in boos. Just used the original sensor, but lengthened the wire. Ran fine for me.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.