digi dial readings.

[jon_boy]

probably been asked before. but dials are reading about twice as fast as im going. gte 8v dials, with 16v speed sender. cheers for any help.

[Dicko]

there is a switch to change it into kmph that would read lots higher but not quite twice as high, make sure it is set to mph and not kmph

[kenny_lad]

there is a little red switch on top of the dash flick it to what ever its not on now think it should be on 1, thats what my problem was, mine was reading slower at the time, see what happens mate

[PE4]

I have a 16v digi dash and transducer, and runnig 14" rims I needed the little red switch on top to be in the '2' position. It explains it in the guide on nova-land mate

hth

S

[moffat sri]

It explains it in the guide on nova-land

it's worth a try just to see if it works though.

[Aragorn]

u cant use a 16v sender on an 8v dash

flick that little switch all day it aint gonna do anything

8v uses 6pulse sender 16v uses 16pulse sender

goto your local scrappy and get a sender from a nova 1.2SPi and it should work correctly

[mikeoxford]

goto your local scrappy and get a sender from a nova 1.2SPi and it should work correctly
STILL dont believe you can get away with using that :lol: